Orange box

BrianNeary · Post by **BrianNeary** » Wed Dec 01, 04 11:05 am

Hi chaps, you have probably been asked this a million times before.
I have a orange box ignition module which is 4 pin, the standard module on my satellite is a 5 pin. Can i modify the wiring to fit the 4 pin connector, or have i gone and ordered the wrong part?

Dave-R · Post by **Dave-R** » Wed Dec 01, 04 11:12 am

One pin is just an earth and if I remember right (and I can check at home if you want) you don't need to modify anything. Just make sure the orange box is well earthed to the bodywork.

Dave-R · Post by **Dave-R** » Wed Dec 01, 04 11:21 am

Here is a diagram. The green wire is the pin you don't need and I assume it is that one you are worried about?

BrianNeary · Post by **BrianNeary** » Wed Dec 01, 04 12:09 pm

Thanks Dave, your a star.

Rich · Post by **Rich** » Wed Dec 01, 04 10:39 pm

DO make sure the box is well earthed though