Eddy head plugs.

Kev · Post by **Kev** » Mon May 07, 07 10:17 pm

What plugs are you EddyHeaded Dudes running? NGK, if you please.

Pete · Post by **Pete** » Mon May 07, 07 10:39 pm

Same as Julie's SEAT!!

I will check tomorrow, but they are long reach multi thingy's.

Anonymous · Post by **Anonymous** » Mon May 07, 07 11:26 pm

NGK/champion 6s , there long reach 10 m/m, can't remmember the Nos

Kev · Post by **Kev** » Wed May 09, 07 10:55 pm

Bump~! Off to Halfords tomorrow!

Anonymous · Post by **Anonymous** » Thu May 10, 07 12:31 am

Sorry kev, forgot to look , you could phone A to Z, No 01923221776 , as Jim has the eddy book , will give you all the plug Nos.

Pete · Post by **Pete** » Thu May 10, 07 6:41 am

BCP6ET

Kev · Post by **Kev** » Thu May 10, 07 9:36 am

Ian Z · Post by **Ian Z** » Thu May 10, 07 10:26 am

any recommendations on gap?

Anonymous · Post by **Anonymous** » Thu May 10, 07 10:29 am

What you using to fire em?

MSD up to 60 thou.

Mopar orange box up to 5 thou.

Kev · Post by **Kev** » Thu May 10, 07 11:25 am

They are 4 prong so gapping would be a nightmare!

dustymopar · Post by **dustymopar** » Thu May 10, 07 10:23 pm

Using Champion RC12YC's gapped a 40 thou

seem to work ok

Kev · Post by **Kev** » Thu May 10, 07 10:40 pm

Ended up with BCPR7ET (3 prong) for future Nitrous use. One step colder than the 6's. Went to 2 Halfords who had none and three. Went to the local motor shop; "what's it for mate?" "Aftermarket Edelbrock alloy heads on a 440ci V8 Chrylser in a '73 Plymouth Barracuda cloned up as a 'Cuda T/A". Other bloke, "what the?" Roots around on the shelf and scares 8 up!

He goes back to the bloke he was serving; "sorry mate, was sidetracked there." "More like excited", I say! "Yer right there!" He sez!

Having trouble tracking down my 15/40 Magnatec................

mopar_mark · Post by **mopar_mark** » Thu May 10, 07 10:55 pm

Roots around on the shelf and scares 8 up

If he had Rootes on the shelf, must of been an old chrysler guy

Kev · Post by **Kev** » Thu May 10, 07 10:59 pm

Dude! That is poor! It was an old video from the 80's. Kunta Kinti! Will he get his fooooooooot chopped off.....

Ian Z · Post by **Ian Z** » Sun May 20, 07 11:38 pm

just rechecked, got BCP7ES in mine. single prong