do i have 727 problems?

[Anonymous]

just seen this,
from cold it should still shift the same maybe a little different but not slippy
is it slipping in 2nd??? or is it as its trying to shift in to 3rd, if its the later it could be the seals in the high gear clutch are contracted and oil pressure is gettin past and not applyin the clutch hence the slip, as it warms up the seals expand and then it all works correct, if it slips in 2nd then its a problem on the servo or the band either way it wants looking at or at the least drive it gently till its warm

dunc, it slips as it tries to shift up into third. it does not slip when its in any gear. it also dose not do it all the time only every now and then and only when cold and after she has been sitting for a while - few days/week.
if its the seals has the box got to come out?

[Cannonball]

yes shaun if the seals are needing att it needs to come out
does it shift hard in to top when its hot, with no slip at all

[Anonymous]

yes shifts up good when hot.
i will hopefuly be at shakey this weekend, perhaps you could have a go of her and tell me what ya think dunc if you are there and don`t mind

[Cannonball]

yes find me in the pits