904 overhaul manual

Anonymous · Post by **Anonymous** » Thu May 24, 07 11:42 pm

Hey, anyone have a loan of a good overhaul manual for a 904 box, or know where i can get one (found one in the states but wont ship here)
If i get it i can drop it back at thepod in july!
Cheers Mo.

Dave-R · Post by **Dave-R** » Fri May 25, 07 10:44 am

Or buy one from Amazon.com?

Dave-R · Post by **Dave-R** » Fri May 25, 07 10:57 am

Just checked for you. Can't find one at all on the 904.

Who wrote the book?

Anonymous · Post by **Anonymous** » Fri May 25, 07 11:27 am

not sure found it on a site "technical video" it is described as "chrysler 727/904 transmission book" but they wont ship it to me

Another place does one i might try but i need it asap, jc whitney auto parts but it could take weeks to come!

latil · Post by **latil** » Fri May 25, 07 12:27 pm

Factory service manual gives a full strip down/rebuild and all settings and tolerances.Can you get one on disc anywhere?

Dave-R · Post by **Dave-R** » Fri May 25, 07 3:36 pm

Most factory manuals for our cars are available from several sources. easy to find on the web.

What year transmission is it?

steve h · Post by **steve h** » Sun May 27, 07 2:16 pm

Try real steel i think they do a manual for the 904.

Anonymous · Post by **Anonymous** » Mon May 28, 07 8:54 am

Dave wrote:Most factory manuals for our cars are available from several sources. easy to find on the web.

What year transmission is it?

Its a 69 trans in a plymouth satellite

Anonymous · Post by **Anonymous** » Mon May 28, 07 8:57 am

Dave wrote:Most factory manuals for our cars are available from several sources. easy to find on the web.

What year transmission is it?

Its a 69 trans in a plymouth satellite

Lance · Post by **Lance** » Sun Jul 01, 07 9:29 pm

Try gearheadcafe.com they may do a disc!!

Lance · Post by **Lance** » Thu Jul 05, 07 9:04 pm

Mo, did you manage to get a 904 manual??
Also read your question about the transmission slipping, i think by the sound of it i have the same problem, did the adjustments sort the problem??

Dave999 · Post by **Dave999** » Fri Jul 06, 07 8:53 am

This contains rebuild and diagnosis for

727
904
torquefilte C and D (basically borgwarner 35 and derivatives)
Chrysler/ford/leyland P76 3 speed and 4 speed single rail manual

http://cgi.ebay.co.uk/Australia-Chrys-7 ... dZViewItem

Buy it scan the bits you need and flog it to one of our recent valiant charger owners.

tis the factory manual published by chrysler so it should be all correct

aussie 904 and 727 were imported, not locally tweaked in any way.
the C and D versions are BW local to Oz but also the gearbox used in stags jags n rovers

Dave

Anonymous · Post by **Anonymous** » Fri Jul 06, 07 9:05 am

Just so happens i only got the box rebuilt last night, was up till 3.30 working on it

Had to wait for 2 months for the parts cause summit sent them by regular mail!!!!!!!! then when the parts came they were for a 727 trans

So i ordered the bits on sunday and they came yesterday, i found the front brake band down to the metal and when i stripped out the clutch's one set was completly shot.
I got a TCI rebuild kit and performance kit for it so im hoping it all works out ok

Its handy enough to do but i had it restripped 3 times to check the pump was in right (bit tight) the mods on the valve body are done in a few minutes as its a pretty simple valve body, should be going back in tonight and ready for sat. Need to get some miles up before the pod.

I didnt get a manual after but did get help from someone on this site, im sure if you put up apost for help you will get it, i dont want to post his details incase other people start getting on his case!

Dave-R · Post by **Dave-R** » Fri Jul 06, 07 9:25 am

Good one.

I like it when people are not scared to have a go.

Anonymous · Post by **Anonymous** » Fri Jul 06, 07 1:33 pm

Dave wrote:Good one.

I like it when people are not scared to have a go.

Cheers Dave