Pinion Snubber.

Scooby · Post by **Scooby** » Sun Jun 24, 07 10:11 am

Here we go rain forces play !!!
My first attempt at making a pinion snubber. As pic show because my car is not stock so ive had to make a few adjustments.

The inner steel sleeve can be moved up or down or any other adj can be taken up by moving the thread up or down. It will adjust to within an 1/4 of an inch from the floor or an inch or so the other way, Oh thanks to Baccman for supplying the snubber.
If anybodies interested, I do have a spare stock snubber.
Rich.

Dave-R · Post by **Dave-R** » Sun Jun 24, 07 11:57 am

Crickey! Thats a tall one.

I had to shorten mine.

Keep that spare snubber rubber thing for the one time you drive all the way home after forgetting to lower it after racing.

Cannonball · Post by **Cannonball** » Sun Jun 24, 07 1:10 pm

you sure the washer and nut dont sit down in the tower and against the rubber snubber, that lot dont look to stable to me

Anonymous · Post by **Anonymous** » Sun Jun 24, 07 2:01 pm

Rich , fitted one of them to a chimney stack last week.

Scooby · Post by **Scooby** » Sun Jun 24, 07 3:50 pm

The snubber is fully extended for now (agree it is tall) but so is the distance between axle and car. And It will be bolted up tight.
Thanks for advice lads.
Adam you taking the p.....s

Rich.

Anonymous · Post by **Anonymous** » Sun Jun 24, 07 6:16 pm

Yea.

AllKiller · Post by **AllKiller** » Sun Jun 24, 07 8:01 pm

Rich, Id lower the threaded part as much as poss, and adjust the collar up more strength in that bit

Scooby · Post by **Scooby** » Sun Jun 24, 07 8:06 pm

Cheers Steve will do....I think Adams jealous of my Chimney stack !!!!
Rich.

Anonymous · Post by **Anonymous** » Sun Jun 24, 07 8:23 pm

Just jealous of the amount of penetration on the welding.

You got any low flying gulls down your neck of the woods?

dustymopar · Post by **dustymopar** » Sun Jun 24, 07 8:38 pm

dustymopar · Post by **dustymopar** » Sun Jun 24, 07 8:39 pm

mopar_mark · Post by **mopar_mark** » Sun Jun 24, 07 9:26 pm

Adam68 wrote:Just jealous of the amount of penetration on the welding.

You got any low flying gulls down your neck of the woods?

That is funny, maybe not nice but true, but definightly funny

Kev · Post by **Kev** » Sun Jun 24, 07 9:42 pm

Dude! Word on the street was that all the race gear was coming off that pretty barge! What's with the pinion snubber if you've gone all gay with the gears?

Scooby · Post by **Scooby** » Sun Jun 24, 07 9:43 pm

Mark.
Was goner fit a set of those Moo Cow Track things, but decided against as I value my teeth....apparently its like riding a 400 pound Heffer wearing shockers.....

Rich

Anonymous · Post by **Anonymous** » Sun Jun 24, 07 9:48 pm

Only messin Rich , just getting you back.

Anyway , regarding Kevs post..............

Mopar Muscle Association UK

Pinion Snubber.

Pinion Snubber.

Thanks for advice.

Cheers.....

Vibration.....