suregrip additive recommended mix ratio?

Kev · Post by **Kev** » Wed Oct 17, 07 12:15 pm

LS80W-90 Limited Slip Gear Oil

Kev · Post by **Kev** » Wed Oct 17, 07 12:16 pm

DaveR will be along in a minute to recommend some tractor stuff.....

Anonymous · Post by **Anonymous** » Wed Oct 17, 07 1:26 pm

too add the Mopar additive it's on weight

not very useful I know but a 9.25 takes 8floz

Dave-R · Post by **Dave-R** » Wed Oct 17, 07 2:05 pm

Kev wrote:DaveR will be along in a minute to recommend some tractor stuff.....

Cheeky begger.

Dave-R · Post by **Dave-R** » Wed Oct 17, 07 2:06 pm

Here is some tractor stuff I use.

£10 for 5 litres is not bad though is it?

Dave-R · Post by **Dave-R** » Wed Oct 17, 07 2:08 pm

martywrenn wrote:does this LS80W90 oil come pre mixed with the additive?
and can this oill be picked up from any motor factors?
marty

Yes.

And probably.

Anonymous · Post by **Anonymous** » Wed Oct 17, 07 2:08 pm

GM's additive came in a small bottle.

Pop in all the bottle then top up with gear oil.

Not sure that may help though.

But it was an instant cure to the Detroit Locker syndrome.

Jeff · Post by **Jeff** » Wed Oct 17, 07 8:53 pm

Chrysler dealerships sell a mopar LSD additive from theparts counter. £5 a bottle. Daves oil is a LOT cheaper though.

Dave-R · Post by **Dave-R** » Thu Oct 18, 07 2:09 pm

90 weight is correct for chrysler axles.

Dave-R · Post by **Dave-R** » Thu Oct 18, 07 2:14 pm

If it is LSD (limited slip diff) oil then it already has the additive in it. No need to add more.

If it is normal gear oil you need the aditive.

Mopar Muscle Association UK

suregrip additive recommended mix ratio?

Re: ls80w90 gear oil