Replacing the K Member for a BB

Moderator: Moderators

User avatar
Pete
Posts: 22109
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Your medication is wearing off, Dave. Go have a lie down. Let Diane finish the Challenger for you, pet.
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
Pete
Posts: 22109
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

You probably have a 6 banger, Pete ;)
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
Gareth
Posts: 1547
Joined: Tue Dec 07, 04 9:23 pm

Post by Gareth »

pete walton wrote:Its confusing having two Petes so do you want to be hairy Pete or Fast Pete i cant be either of those
Shouldn't you be Carlos, Mr Fandango ? :D
All we are is rust in the wind
User avatar
Pete
Posts: 22109
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

I have been "Pete" on the MMA board since 1997. Here's pulling seniority (not age related) ;)
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
Dave999
Posts: 9563
Joined: Thu Feb 24, 05 10:31 am
Location: Twickenham,London, England

Post by Dave999 »

and you left out the aussie hemi as well

its K frame is different also

and whats this about bolting a steering box to a k frame everyone knows the chassis rail is much much better :?


Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
User avatar
Pete
Posts: 22109
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Wibble wobble.................
Pete Wiseman; Cambridge.

Mopar by the grace of God
Anonymous

Post by Anonymous »

I have come in to possesion of a Hemi K member and I have a K member on my 383... So I will take photos and we will see what the story is in regards to this!!
User avatar
Pete
Posts: 22109
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Red, I have already fitted a Hemi "K". I know the differ and will also bolt straight in.
The debate was that Dave would not initially accept that the "B" body and the "E" body Hemi "K" members were the same/interchangeable; which I think we all accept now is the case.....all friends again :D
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

I was prepared to believe it Pete but I was pushing hard for exactly what the difference in the K-member was. Information I have been after for years.
User avatar
Pete
Posts: 22109
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Nothing wrong with that, Dave :thumbright:

That's the value of the message board.
Pete Wiseman; Cambridge.

Mopar by the grace of God
Anonymous

Post by Anonymous »

Well lets put it to bed then I will take the photos Pete and post them both up here..if they are the same then Dave must give you a jockyback down the pod strip at next years Nats and if they aint then Dave gets to get you in a sweaty 2min headlock after giving me a jockyback down the pod strip...are we game gentlemen...ten paces please!! :D :thumbright:
User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Post by Cannonball »

how have you aquired a hemi k red,
www.dwatts80.fsnet.co.uk

WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME

OFTEN OUTNUMBERED NEVER OUTGUNNED,

HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,

I HAVE A NVQW

LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,

THE PASS IS THE JUICE,

LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
Post Reply