underbody prep

Kev · Post by **Kev** » Tue Nov 20, 07 9:10 pm

I'll have to strip me Dana!

Anonymous · Post by **Anonymous** » Tue Nov 20, 07 9:42 pm

Kev wrote:I'll have to strip me Dana!

Tis a nice new shiney black one Aint it?

Only striped it cos i had to change the 4:53s to gay 4:10s.

andyrob · Post by **andyrob** » Tue Nov 20, 07 9:44 pm

cheers lads for your help
so

to powder coating
it cheaper then sanding & painting & alot less hassle
yes blue good idea to cover the diff & tube ends
clive that was the mopar axle ive stripped- piece of cake !
has anyone tried getting bolts/nuts anodised ? as dont want to get the threads powder coated ( as said you cannot get it off )
does the old coka-a-cola trick work ?

Anonymous · Post by **Anonymous** » Tue Nov 20, 07 9:47 pm

Andy , any overspray when powdercoated can be removed with nitromors , although i tried me hardest to mask it.

Anonymous · Post by **Anonymous** » Tue Nov 20, 07 9:53 pm

John, thanks for the offer, but Steve offered as soon as I made my thickness known.

I would like to borrow the plates though if thats ok. Have you still got them close-ish to hand?

Adam, 365 is flippin cheap for P Coating an axle methinks

Blue · Post by **Blue** » Tue Nov 20, 07 10:24 pm

I'll have a look Tomorrow Clivey and see if I can find them...

Anonymous · Post by **Anonymous** » Tue Nov 20, 07 11:24 pm

Bless you child

Anonymous · Post by **Anonymous** » Tue Nov 20, 07 11:37 pm

If you want a cheap alternative just take it up to bovi airfield.

Anonymous · Post by **Anonymous** » Tue Nov 20, 07 11:42 pm

Knightcharger wrote:If you want a cheap alternative just take it up to bovi airfield.

AllKiller · Post by **AllKiller** » Fri Nov 23, 07 11:13 pm

Most of the underside of mine is powder coated...11 years now still looks good, easy to clean too....tis the way to go for sure.
Clive as Kev said get it apart, its a doddle, you could do it have faith son

Mopar Muscle Association UK

underbody prep

Underbody

Re: Underbody