how much hp you got ?

Moderator: Moderators

User avatar
andyrob
Posts: 4142
Joined: Tue Jun 20, 06 8:59 pm
Location: northumberland

how much hp you got ?

Post by andyrob »

try using this
http://www.mymopar.com/hpcalc1.htm
would my RR weigh 4100 with me in ?
if so works out at 519bhp is this fairly acuarate ?
b r l 3700 pounds = 564bhp ?
put duncan chally in at 9.4 & gives a cool 951 :thumbright:


can you tell im well board- not allowed to go to work today
Im a real christmas barr-hum-bug
life is not a spectator sport

www.andyrobinson.eu
andy robinson

68 572 coronet RT
72 440 chrysler new yorker
69 518 daytona
User avatar
Pete
Posts: 22108
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

574bhp For the Sox with the last motor. Sounds a bit low. DTD gives 622bhp.
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

350hp for the cab, 150 drugs, 200 motor? :?
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
User avatar
latil
Posts: 12076
Joined: Tue Feb 01, 05 10:37 pm
Location: Steve Pearson MMA/014. East Grinstead and Carmarthen.

Post by latil »

Something's adrift. :lol: stock 318 2bbl is 230hp :roll:
1965 Belvedere 2 426 Wedge.

Climate change,global warming,the biggest tax raising scam ever devised by man for mankind.

Motivating Our People,Accelerating Rapidly.
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

exactly! :D
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

Is this rear wheel HP or crank?
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

It gives me 460.
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

Must be rear wheel HP. If you factor in about 70hp to drive the trans that gives me 530hp which would be about right.
User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Re: how much hp you got ?

Post by Cannonball »

andyrob wrote:try using this
http://www.mymopar.com/hpcalc1.htm
would my RR weigh 4100 with me in ?
if so works out at 519bhp is this fairly acuarate ?
b r l 3700 pounds = 564bhp ?
put duncan chally in at 9.4 & gives a cool 951 :thumbright:


can you tell im well board- not allowed to go to work today
Im a real christmas barr-hum-bug
that engine was makin circa 900-920 hp,

i would reckon your runner with you in approx 3,9201bs
www.dwatts80.fsnet.co.uk

WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME

OFTEN OUTNUMBERED NEVER OUTGUNNED,

HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,

I HAVE A NVQW

LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,

THE PASS IS THE JUICE,

LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Post by Cannonball »

orange chall came out at 916 hp
blue chall came out at 726 hp
and when the orange chall had the hemi heads on the factory 440 block with terrible ring seal 720 hp
www.dwatts80.fsnet.co.uk

WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME

OFTEN OUTNUMBERED NEVER OUTGUNNED,

HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,

I HAVE A NVQW

LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,

THE PASS IS THE JUICE,

LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
User avatar
Jon
Posts: 1874
Joined: Sun Apr 18, 04 11:06 pm
Location: Preston

Post by Jon »

these things work a lot better on mph than ET
your MPH is usually pretty consistent even if ETs are all over the place due to traction issues, etc...

http://www.mymopar.com/hpcalc.htm
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

Mine works out as 445hp now (down from 460 doing it the other way) which agrees with my theory that it was falling flat at the top end.

That is for sure rear wheel HP.
User avatar
Pete
Posts: 22108
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

That brings mine up to 582 bhp using mph. I think that is rear wheel horesepower.
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
Pete
Posts: 22108
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Julies worked out at 387bhp.................
Pete Wiseman; Cambridge.

Mopar by the grace of God
Anonymous

Post by Anonymous »

Occording to that calculator, in 2006 before the cam + headers were fitted and with no oil pressure, I was running 196
Post Reply