BALL JOINTS

Ashley · Post by **Ashley** » Sat Feb 26, 05 4:32 pm

Ok fella's here's one for you.
Tried to fit new lower ball joints today guess wot they dont fit.
Problem is i can't get the back plate's on there catching the arm's.
Anyone had this problem before.
The year one catalog say's 1966-72 B-Body all the same.
Any help would be most aprreciated.

Alex · Post by **Alex** » Sun Feb 27, 05 9:24 am

My thoughts as well Terry.

Did Guy enjoy his tea in bed this morning??

Guy · Post by **Guy** » Sun Feb 27, 05 4:33 pm

The tea wasn't bad it was waking up with my hand between two soft pillows that really got my attention

us ex-submariners never change

Ashley · Post by **Ashley** » Sun Feb 27, 05 10:14 pm

Ye fella got the right side.
The old one's have a grove cut in the side for back plate clearance.
These don't.
Look's like Mr Eady gets a call tomorrow.

Ashley · Post by **Ashley** » Fri Mar 04, 05 5:06 pm

Ok fella's word of WARNING.
Be carefull when ordering lower Ball joints.
Some make's are different shaped arm's so you can't get the back plate's
on. I ended up with MOOG joint's that will fit.
Any doubt talk to Dave Eday.