the roadrunner ANOTHER VIDEO must see

Kev · Post by **Kev** » Thu Mar 27, 08 7:29 pm

Shiney stuff!

Is it a cast crank?

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 9:01 pm

hope this helps kev lol

Eagle 4340 steel ESP CRANK! 4.00 stroker part # 434040006123. (INTERNAL BALANCE)
Eagle 6.123 " H-beam ESP 4340 steel Bushed rods with 7/16 ARP cap bolts, part# CRS6123C3D
ROSS part # 99786 4.070" -21cc DISH (FORGED) PISTONS .030, pistons 10.6:1 comp w/62cc head10.2:1 comp w/62cc head, or 9.6:1 with a 68 cc head (((OR))) ......
ROSS part # 99788 4.070" 4cc DOME (FORGED) PISTONS .030, pistons 13.6:1 comp w/62cc head, or 12.5:1 with a 68 cc head
NOTE: ROSS doesn't make a flat top piston, If you want flat top pistons, I can mill the 99788 to a flat top, these would be 11:1 with a 68cc head. The price is $50 more.
NOTE: These pistons will work with Mopar OPEN and CLOSED chamber, Edelbrock and Indy heads!
Clevite H race rod & main bearings.
Plasma moly file fit or standard fit rings. Rings will be Speed Pro or Total Seal (not gapless)

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 9:10 pm

What's the comp ratio Simon?

Are they open or closed chamber heads?

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 9:33 pm

correct me if im wrong si. i think he's gone 11:1 with open 340 heads

Kev · Post by **Kev** » Thu Mar 27, 08 9:38 pm

This kit is good for 750+hp! Can be upgraded with ARP L19's rod bolts to 1000hp!
This is an INTERNAL Balance assembly to have this balanced would be an additonal $120.

http://cgi.ebay.com/ebaymotors/SB-MOPAR ... 0036756071

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 9:38 pm

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 9:39 pm

Kev wrote:This kit is good for 750+hp! Can be upgraded with ARP L19's rod bolts to 1000hp!
This is an INTERNAL Balance assembly to have this balanced would be an additonal $120.

http://cgi.ebay.com/ebaymotors/SB-MOPAR ... 0036756071

yep BUT i didnt do it on ebay i went to there website and phoned them several times nice bunch of guys

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 9:42 pm

Brutus wrote:

whats up brutus

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 9:43 pm

Nothing Simon , i hit the wrong smilie.

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 9:46 pm

Brutus wrote:Nothing Simon , i hit the wrong smilie.

i cant wait untill things start going in

latil · Post by **latil** » Thu Mar 27, 08 10:22 pm

[quote="strokerblue72"

i cant wait untill things start going in[/quote]

Is that what the girlfriend said?

TYREMAN · Post by **TYREMAN** » Thu Mar 27, 08 10:23 pm

So what is an estimate of the Horsepower and Tourqe? (when built and in)

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 10:27 pm

TYREMAN wrote:So what is an estimate of the Horsepower and Tourqe? (when built and in)

1800bhp

i dont know mate cant wait to find out though

Anonymous · Post by **Anonymous** » Thu Mar 27, 08 10:28 pm

latil wrote:[quote="strokerblue72"

i cant wait untill things start going in

Is that what the girlfriend said?[/quote]

think thats almost watershed territory

RayC · Post by **RayC** » Thu Mar 27, 08 10:29 pm

latil wrote:[quote="strokerblue72"

i cant wait untill things start going in

Is that what the girlfriend said?[/quote]

doubt it, or at least not since she took the wrapper off it