the roadrunner ANOTHER VIDEO must see

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 8:43 pm

well i have changed the edlebrock for this and the valve covers came in the post today all three nice and shiny

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 8:50 pm

Simon , those breathers hiss out oil , they are turned up on the underside , which is where they leak.

Better paint that block white.

Sorry mate , you must be really hacked off with people tellin you what you don't wanna hear.

Maybe fit the gromet with the relief hole in it.

latil · Post by **latil** » Thu Apr 10, 08 9:43 pm

strokerblue72 wrote: the valve covers came in the post today all three nice and shiny

3 valve covers?

You NEED a TrevD thermostat housing on there....

bananaskin · Post by **bananaskin** » Thu Apr 10, 08 10:04 pm

latil wrote:
strokerblue72 wrote: the valve covers came in the post today all three nice and shiny
3 valve covers?

Im guessing he means the 2 valve covers and the filter?

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 10:18 pm

Brutus wrote:Simon , those breathers hiss out oil , they are turned up on the underside , which is where they leak.

Better paint that block white.

Sorry mate , you must be really hacked off with people tellin you what you don't wanna hear.

Maybe fit the gromet with the relief hole in it.

no its ok mate input is always good BUT i have got an old set of these and i have never had any problems with them whatso ever hope to prove you wrong with these also

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 10:26 pm

When you got oil over yer headers & block , don't go chasing leaky valve cover gaskets.

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 10:31 pm

Brutus wrote:When you got oil over yer headers & block , don't go chasing leaky valve cover gaskets.

IF mate IF i do hear you mate if you prove me wrong then you are more than welcome to point and laugh but i went for these because i was so happy with the last ones

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 10:32 pm

latil wrote:
strokerblue72 wrote: the valve covers came in the post today all three nice and shiny
3 valve covers?

You NEED a TrevD thermostat housing on there....

i have asked for one

latil · Post by **latil** » Thu Apr 10, 08 10:50 pm

You won't be disappointed.

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 10:52 pm

i have heard good things and they look fantastic

MilesnMiles · Post by **MilesnMiles** » Thu Apr 10, 08 10:54 pm

Those breathers leak?, so i won't be replacing the inlet gasket after all!
Meantime, haven't read all 22 pages (read quite a few though) so what sort of HP are you expecting from the finished build, Simon?

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 10:56 pm

MilesnMiles wrote:Those breathers leak?, so i won't be replacing the inlet gasket after all!
Meantime, haven't read all 22 pages (read quite a few though) so what sort of HP are you expecting from the finished build, Simon?

i really dont know HP wise mate will find out when its all done

Guy · Post by **Guy** » Thu Apr 10, 08 10:59 pm

Everyone will point this out to you simon, I would give it a little flat and repaint it while it is still off

Anonymous · Post by **Anonymous** » Thu Apr 10, 08 11:02 pm

lol thanks guy it has already been pointed out it will be sorted

Guy · Post by **Guy** » Thu Apr 10, 08 11:02 pm

I think you will be a little suprised once you have it run in, and plant you foot in anger for the first time . At least you will be on the road a lot quicker than me