plate mounting

Moderator: Moderators

Post Reply
User avatar
Ian Z
Posts: 1462
Joined: Sun Jan 15, 06 9:33 pm
Location: Preston, oop north

plate mounting

Post by Ian Z »

DOH!
wots the proven way of mounting licence plates, por favor.
Involuntarius peristalsis rectum

"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo
<a href="http://www.mybannermaker.com/" target="_blank"><img src="http://img153.imageshack.us/img153/1862 ... cebsh4.jpg" alt='Create your own banner at mybannermaker.com!'></a><br>
Top
User avatar
TrevD
Posts: 4359
Joined: Sun Apr 18, 04 10:28 pm
Location: Essex

Post by TrevD »

2 screws is the usual way, but i prefur to use either STRONG double sided tape or no nails to a plate bolted to the car (with countersunk bolts) so no unsightly boilts on show
too much is never enough
Top
User avatar
Blue
Posts: 14417
Joined: Sun Apr 18, 04 11:29 pm
Location: Straight outta Royston

Post by Blue »

Double sided body moulding tape looks neatest.
“It’s good enough for Nancy”
Top
User avatar
Pete
Posts: 22109
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Skyhooks :thumbright:
Pete Wiseman; Cambridge.

Mopar by the grace of God
Top
Anonymous

Post by Anonymous »

you still got any of that tartan paint left over...........? :thumbright:
Top
User avatar
Ian Z
Posts: 1462
Joined: Sun Jan 15, 06 9:33 pm
Location: Preston, oop north

Post by Ian Z »

fanks u
Involuntarius peristalsis rectum

"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo
<a href="http://www.mybannermaker.com/" target="_blank"><img src="http://img153.imageshack.us/img153/1862 ... cebsh4.jpg" alt='Create your own banner at mybannermaker.com!'></a><br>
Top
Post Reply

Return to “Bodywork, Chassis & Suspension”