Disc brake conversion, 68 Charger.

Moderator: Moderators

User avatar
JohnR
Posts: 876
Joined: Sun Apr 18, 04 11:06 pm
Location: burstow ,near Gatwick .
Contact:

Post by JohnR »

Dave your calipers look like GM units.When I put Scotts conversion on the part numbers were ground off but was told they were GM but do not know what from
John Rutledge
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

I am sure they are Mopar.
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

After digging around I think my Mopar Slider calipers could be '76-'79 2-door B-body (X,S) or 79-up R-body.
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

Answering my own question again, it turns out that this was a very common caliper. Used on virtually everything from 74 up into the 90s on Dodge trucks & most RWD cars , , Duster , Volare , Magnum , Cordoba , Diplomat, 1/2 tons trucks & vans.
Post Reply