Floorpans/panels

Anonymous · Post by **Anonymous** » Fri Oct 03, 08 9:53 am

Anyone know if repro floorpans ect are available for a '65 fury?

Asking on behalf of Fi, who is trying to restore Baccy's old red one.

RobTwin · Post by **RobTwin** » Fri Oct 03, 08 10:22 am

Lee, I've asked on the 62-65 Mopar mail list. I'll let you know as soon as I hear back....

Anonymous · Post by **Anonymous** » Fri Oct 03, 08 10:26 am

Nice one Rob

latil · Post by **latil** » Fri Oct 03, 08 10:34 am

Yep.
http://www.rustrepair.com/BODY_PANELS/o ... TH-BELV.64

Anonymous · Post by **Anonymous** » Fri Oct 03, 08 10:36 am

Cheers Latil

latil · Post by **latil** » Fri Oct 03, 08 10:37 am

Kramer might help,too.
http://www.kramerauto.com/

RobTwin · Post by **RobTwin** » Sun Oct 05, 08 12:41 am

latil wrote:Yep.
http://www.rustrepair.com/BODY_PANELS/o ... TH-BELV.64

Be careful of that info Lee, that web page shows panels for the 64 Fury & 65 Satellite which are B bodies - the 65 Fury is a C body

Sorry Latil

I got this reply from the guy that runs the 62-65 Mopar site

"I never saw a 65 C body repro floor pan advertised; probably only used ones are available. So it's probably cheaper in the UK to use generic sheet metal and weld in a new floor."

Hope something turns up

Anonymous · Post by **Anonymous** » Tue Oct 07, 08 9:41 am

Ta anyway, i'll let Fi know.

Glad my floors are solid.

jerry · Post by **jerry** » Fri Oct 10, 08 8:17 pm

These any good
http://cgi.ebay.com/ebaymotors/FRONT-FL ... 06.c0.m245
http://cgi.ebay.com/ebaymotors/TRUNK-PA ... 06.c0.m245

Anonymous · Post by **Anonymous** » Mon Oct 13, 08 10:58 am

Classicparts4u stitched Fi up, but ta anyway.