Sox update - Hausers have perverted my Hemi!!

Pete · Post by **Pete** » Fri Oct 17, 08 8:50 pm

Latest picture. Will it go under the hood???

mopar_mark · Post by **mopar_mark** » Fri Oct 17, 08 9:31 pm

Very Nice, unusual choice of inlet manifold

Wish I had of went with mechanical fuel pump set up, as opposed to 2 x Lecky units

mopar_mark · Post by **mopar_mark** » Fri Oct 17, 08 9:39 pm

How a bout a Twin turbo 588"'s of Billet block BAE headed Alky burning Hemi built by Taylor Lastor..

Looking at potential 4000hp in a 10.5W" Camaro

Pete · Post by **Pete** » Fri Oct 17, 08 10:02 pm

Absolutely Johnny mental!

NaughtyAlan · Post by **NaughtyAlan** » Fri Oct 17, 08 10:14 pm

Awesome Pete, just made a mess in me pants

Anonymous · Post by **Anonymous** » Fri Oct 17, 08 10:16 pm

Whoa!

Hey Pete you wanna swap?

latil · Post by **latil** » Fri Oct 17, 08 10:23 pm

Awesome

Pete · Post by **Pete** » Fri Oct 17, 08 10:33 pm

I think Mark is the most observent amongst you

Fairly mild state of tune.
Should make a conservative 750 bhp, with scope to cam it up quite a lot if required.

Should go OK in a 1900lb "A" body.

Tire-limited, so won't be that quick...but "NO GAS"

NaughtyAlan · Post by **NaughtyAlan** » Fri Oct 17, 08 10:38 pm

Might do a high 11 then in a barge

Pete · Post by **Pete** » Fri Oct 17, 08 10:47 pm

You would need a better driver than me..

mopar_mark · Post by **mopar_mark** » Fri Oct 17, 08 10:55 pm

Pete wrote:Tire-limited, so won't be that quick...

Arn't they running 6's on 10.5" tires now

Pete · Post by **Pete** » Fri Oct 17, 08 11:01 pm

"cheats tyres" with 15 x 15" rims and bead locks.
Old school, me

Anonymous · Post by **Anonymous** » Sat Oct 18, 08 12:01 am

NaughtyAlan wrote:Might do a high 11 then in a barge

Lookin good Pete

.........Is there a difference between gas or blown?............thought not ,you just get it for free with no 'livin on the edge'.

Pete · Post by **Pete** » Sat Oct 18, 08 12:09 am

Wow! deep!" Is the Bananarama! home tonight or are you an alias??

newport100 · Post by **newport100** » Sat Oct 18, 08 12:10 am