will it fit

LONGSHOT · Post by **LONGSHOT** » Sat Oct 18, 08 8:53 am

Mornin you lot-quick question-Latil spotted on e bag a 72 dart with discs
and 8 1/4 axle -would that all fit my 69 dart?thanks,Dave

Pete · Post by **Pete** » Sat Oct 18, 08 9:16 am

I think so, but that is a non-binding response

LONGSHOT · Post by **LONGSHOT** » Sat Oct 18, 08 10:23 am

cheers Pete-anyone else clarify further?dont want to bid if it wont fit

MilesnMiles · Post by **MilesnMiles** » Sat Oct 18, 08 10:43 am

Didn't the 8.25 replace the 8.75 rear on A bods? If so, should fit unles the 69 Dart has a wider track than the 70's versions.

Cannonball · Post by **Cannonball** » Sat Oct 18, 08 12:03 pm

MilesnMiles wrote:Didn't the 8.25 replace the 8.75 rear on A bods? If so, should fit unles the 69 Dart has a wider track than the 70's versions.

no way will a 69 have a wider track could be the other way round

MilesnMiles · Post by **MilesnMiles** » Sat Oct 18, 08 5:42 pm

8 & 3/4 in a bod is 56" tack. A bods used 8.25" axles from '73 up. Phone the guy and get him to measure it!

Blue · Post by **Blue** » Sat Oct 18, 08 6:01 pm

It will all bolt straight in, I've done it before. It will all be large stud pattern though, which will urinate on your chips somewhat, unless you were planning on getting another set of wheels....

MilesnMiles · Post by **MilesnMiles** » Sat Oct 18, 08 6:23 pm

well, if the end result is that you have a spare pair of 7 x 15 with 4"pcd. Gimme a shout!

mopar_mark · Post by **mopar_mark** » Sat Oct 18, 08 8:47 pm

Pete wrote:I think so, but that is a non-binding response

Non binding axle sounds a good idea

LONGSHOT · Post by **LONGSHOT** » Sun Oct 19, 08 12:33 pm

ok,cheers chaps- Blue- i wanted to change the wheels anyway as they are only 13 inch rims!! looks like a bit of work this winter then