440 hood emblem to 340

newport100 · Post by **newport100** » Tue Nov 04, 08 11:30 pm

mmmm David

let me have a look - I may just have some 340 emblems left over from me Cuda

Ill check at the weekend

latil · Post by **latil** » Wed Nov 05, 08 7:51 am

Search US ebay motors,no need to cut originals.
http://cgi.ebay.com/ebaymotors/MOPAR-PE ... .m20.l1116

Dave-R · Post by **Dave-R** » Wed Nov 05, 08 9:15 am

latil wrote:Search US ebay motors,no need to cut originals.
http://cgi.ebay.com/ebaymotors/MOPAR-PE ... .m20.l1116

He wants to replace the 440 one with a 340 one.

There isn't a 340 six pack version of this because the only 340 six pack was the T/A and that didn't have hood emblems. The best you can do is cut up a 340 hood emblem and your existing 440 and try to make one badge out of the two.

Dave-R · Post by **Dave-R** » Wed Nov 05, 08 3:06 pm

You will not find a "3" the same size as the "4".

Just get a 340 badge and use the whole "340" bit in front of the "SixPack".

latil · Post by **latil** » Wed Nov 05, 08 3:26 pm

There's '340 four barrel' bonnet emblems reproduced.
http://chucker54.stores.yahoo.net/340fonaemho.html

Dave-R · Post by **Dave-R** » Wed Nov 05, 08 3:53 pm

Yep. That is the one I am talking about.

Dave-R · Post by **Dave-R** » Wed Nov 05, 08 3:56 pm

Actually looking at that 340 fourbarrel badge it might have digits pretty close to the size as the 440 digits. I would still change the whole number though.

gmopar59 · Post by **gmopar59** » Wed Nov 05, 08 5:00 pm

Dave, is that a space saver wheel you have under the car in 1st photo

Pete · Post by **Pete** » Wed Nov 05, 08 7:30 pm

Change the engine out to a 440 - it would be easier....

Anonymous · Post by **Anonymous** » Wed Nov 05, 08 9:29 pm

I still have those emblems if ya want em, same applies no charge mate.