Shipping from the States

[Stu]

got sick off playing it, but it paid the morgage

Just off the plays in our house when I was a kid, I reckon...

[68valiant]

I'm looking for a forged 4" stroker kit for a 360. (Crank, Rods, Pistons, Bearings, Rings)
Been quoted around 2700 pounds by a couple of UK companies.
Summit sells them for $1400 to $2000.
Can you give me a quote on shipping or suggest a UK retailer with sensible prices?

[Dave-R]

Not many cheap crank suppliers that Wil will touch.

But this company is run by a guy very like Wil so you should be OK with these.

http://www.hughesengines.com/Index/prod ... rtid=25286

[Anonymous]

crank on it's own is going to weigh 60lb ish

so figure approx 80lb to 100lb total weight

you're going to be around £200 to £250 TOTAL ISH

that will include shipping, duty and Vat

[Dave-R]

Sounds like a bargin to me.

[Anonymous]

Not many cheap crank suppliers that Wil will touch.

But this company is run by a guy very like Wil so you should be OK with these.

http://www.hughesengines.com/Index/prod ... rtid=25286

Dave, don't bother what I ship nowadays, this thread is so out of date it wants burying

up to date one here www.moparuk.com/forums/viewtopic.php?t=23380

or ebay ad here http://cgi.ebay.co.uk/Shipping-from-the ... 1201wt_908

[68valiant]

crank on it's own is going to weigh 60lb ish

so figure approx 80lb to 100lb total weight

you're going to be around £200 to £250 TOTAL ISH

that will include shipping, duty and Vat

Cheers mate.
Looks like it will be loads cheaper to buy from the states then.
I need loads of other stuff too, so may as well have it all shipped together.
I will be in touch when I have worked out exactly what I need, and where to get it.

[Anonymous]

ok