Sway Bar Set Up for a B-Body

Scooby · Post by **Scooby** » Mon Mar 16, 09 1:48 pm

Does anyone have any information re the set up installation of a sway bar.
Pref to 72 Charger. Pictures would be great. Front Please.
Thanks in advance.
Richard.

Dave-R · Post by **Dave-R** » Mon Mar 16, 09 2:49 pm

You feed it through the K-frame and bolt it on.

But of course if your car never came with one in the first place it is a bit more involved than that.

Is this the case? Did it come from the factory without one?

Scooby · Post by **Scooby** » Mon Mar 16, 09 3:26 pm

Dave.
Yep didnt come with one,hence all the questions.
Thanks.
Rich.

Dave-R · Post by **Dave-R** » Mon Mar 16, 09 3:33 pm

The sway bar kits I have seen come with instructions.

Obviously you don't have those so...

You need the lower control arms from a car that did come with a sway bar. These have the bar mounts welded onto the front of them.
Or if you are good at welding you could fab a pair of mounts and weld them on.

You will also need a couple of 1/4 inch thick plates to bolt to the k-frame. the sway bar bushings mount to these.

Look at anyones Moapr to see how it should look when done.

Scooby · Post by **Scooby** » Mon Mar 16, 09 4:11 pm

Dave.
Thanks.
Richard.

Anonymous · Post by **Anonymous** » Tue Mar 17, 09 12:26 am

It will 60ft better without a sway bar.

Scooby · Post by **Scooby** » Tue Mar 17, 09 11:24 am

Brutus wrote:It will 60ft better without a sway bar.

Ad Mate you taking the p....s

Rich...