Use this forum for all your builds in progress.
Moderator: Moderators
Anonymous
Post
by Anonymous » Thu Mar 26, 09 12:12 am
Yep , that damper was a bitch to get off.
Did you have oiling problems with both heads/valvegear? , or was one side more problematic than the other?
Anonymous
Post
by Anonymous » Thu Mar 26, 09 12:12 am
Yep , that damper was a bitch to get off.
Did you have oiling problems with both heads/valvegear? , or was one side more problematic than the other?
mopar_mark
Posts: 6738 Joined: Fri Jul 14, 06 8:01 pm
Location: Windlesham, Surrey
Post
by mopar_mark » Thu Mar 26, 09 12:15 am
Brutus wrote:
Yep , that damper was a bitch to get off.
Did you have oiling problems with both heads/valvegear? , or was one side more problematic than the other?
To be honest, I'm not sure now..... Think one side was more problematic, but again I'm not 100% certain.
Did you find something then ?
"I spent a lot of money on booze, birds and fast cars. The rest I just squandered."
Anonymous
Post
by Anonymous » Thu Mar 26, 09 12:22 am
mopar_mark wrote:
Did you find something then ?
Would it of been the pas side bank? , came across it by chance & certainly would,nt of been an easy find , just thinking if all these heads suffer with the same problem.
Seems to be an issue with oil way allignment on one head , if the heads are swapped over problem solved........tis a relatively easy fix so will keep the heads in order they came off.
Anonymous
Post
by Anonymous » Thu Mar 26, 09 12:52 am
Mark what is the little plate to the right of the bottom pulley?
Bolted onto the front plate
Cannonball
Posts: 17242 Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:
Post
by Cannonball » Thu Mar 26, 09 12:59 am
Knightcharger wrote: Mark what is the little plate to the right of the bottom pulley?
Bolted onto the front plate
i would think its the timing indicator,
www.dwatts80.fsnet.co.uk
WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME
OFTEN OUTNUMBERED NEVER OUTGUNNED,
HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,
I HAVE A NVQW
LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,
THE PASS IS THE JUICE,
LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
mopar_mark
Posts: 6738 Joined: Fri Jul 14, 06 8:01 pm
Location: Windlesham, Surrey
Post
by mopar_mark » Thu Mar 26, 09 5:50 pm
Cannonball wrote: Knightcharger wrote: Mark what is the little plate to the right of the bottom pulley?
Bolted onto the front plate
i would think its the timing indicator,
I guess you mean on the left as you look at the photo ?
If so, Yes, as Dunc said, timing indicator.
"I spent a lot of money on booze, birds and fast cars. The rest I just squandered."