This is a list of the parts that where either PAID for or SUPPLIED to the builder for the build.
All this was MISSING when the body/chassis was recovered
....................................................................................................
Here is list of missing parts from my willys coupe project. In no particular order.
Engine was to be a crate small block chevy, uprated with forged pistons, blower cam
etc etc but i don,t think the, thing, as i,ll call him ever bought it all! Parts
supplied, bds 6/71 blower, from uk blowers, with pulleys, etc. Vintage speed
stromberg 97 6x2 gold anodised carbs with manifold for blower, all linkages etc.
Pair 3x2 finned air filters and matching finned sbc valve covers with s/h mt angled
breathers. Pair pro-trac 515-45-15 radial tyres. Pair genuine 60,s 15x15 ansen slot
mag wheels, brought from steve trott. Pair new 7x15 ansen slot mags with 225-50-15
cooper cobra tyres, all ford 5-stud, 4half inch pcd, wheel nuts, centre caps.
Maltese cross peep mirror. Willys replacement parts 1 piece 41 grille, front bumper,
side trim, complete 40 headlights and surrounds, willys script badges. V8 badge 32
model b style. 59 repro caddy taillights,4 orange and 4 red complete. Nos nitrous
oxide sportsman fogger system direct port injection, all that was left was bottle
and line! Nos time based progressive nitrous controller. Chevy t56 speedo drive.
Gear stick for same box drilled. Edelbrock performer rpm ali heads for sbc. McCleod
street twin clutch with flywheel etc for sbc. Sytec red fuel filter. Cobra talking
alarm system. Pair silver race harnesses with quick release mechanism. Pair s/h ww2
aircraft lap belts light green. Mustang 2 front suspension, lhd, power steering
fitted with air suspension from rayvern hydraulics. Strange internals for ford 9
inch rear axle with spool. 6 different gear *handle*s, gold skull, karma custom ww2 hand
grenade with pin, ww1 hand grenade with pin, piston gear*handle*, punchy gear*handle* from
namco automotive, and, sorry can,t remember what other 1 was! Skull hand door
mirrors, pair. Euromirror for lhd to see oncoming traffic. Gold chain link steering
wheel 3-spoke 10inch dia 5inch dish. Complete 41 fibreglass willys front end, wings,
bonnet, grille surround, rear wings, pair doors which had been cut down to go with
roof chop, boot floor and inner rear tubbs. Complete painless wiring kit. Ididit
adjustable steering column. Wilwood disc brakes all round. Parachute, simpson i
think? Please keep your eyes open for any of the above parts. I do NOT expect anyone
to replace the above parts, most of them are far too costly. Many, many thanks.
Alan
..........................................................................................................
A complete Big Block MOPAR engine in bits has been offered for the new rebuild, so a box would be a help if you have a spare you don't need
As well as donating parts it's great to see some offering their time and skills to work on the project . Positive PR from companies who DO care rather than shaft the customer
.
