Moderator: Moderators
Derek
Posts: 7502 Joined: Sun Apr 18, 04 11:19 pmLocation: Surrey
Contact:
Post
by Derek Wed Apr 22, 09 8:55 pm
This is what has happened now old Brutus is running on all eight
Are we there yet dad ..... 10 to the gallon but worth it.
challenger
Posts: 881 Joined: Sat May 19, 07 6:03 pmLocation: kingswinford,kidderminster
Post
by challenger Wed Apr 22, 09 9:04 pm
keep it mopar !
the dodge
Posts: 1360 Joined: Wed Sep 05, 07 8:40 pmLocation: Oxford, England
Post
by the dodge Wed Apr 22, 09 9:11 pm
wow never seen anything like that happen, is it common on mopars, or only if youve got a trillion horsepower?
ticking away the moments that make up a dull day, you fritter and waste the hours in an offhand way.
challenger
Posts: 881 Joined: Sat May 19, 07 6:03 pmLocation: kingswinford,kidderminster
Post
by challenger Wed Apr 22, 09 9:13 pm
not so common when your running a dana axle
keep it mopar !
JohnR
Posts: 876 Joined: Sun Apr 18, 04 11:06 pmLocation: burstow ,near Gatwick .
Contact:
Post
by JohnR Wed Apr 22, 09 9:17 pm
Looks like the bearing siezed up any other damage Adam ???
John Rutledge
Dave-R
Posts: 24752 Joined: Sun Apr 18, 04 11:23 pmLocation: Dave Robson lives in Geordieland
Contact:
Post
by Dave-R Wed Apr 22, 09 9:32 pm
Green bearings I bet? I have heard of that happening with those.
Pete
Posts: 22109 Joined: Sun Apr 18, 04 10:49 pmLocation: MMA Chairman
Post
by Pete Wed Apr 22, 09 10:19 pm
Scary, Hope no damage or injury....
Pete Wiseman; Cambridge.
the dodge
Posts: 1360 Joined: Wed Sep 05, 07 8:40 pmLocation: Oxford, England
Post
by the dodge Wed Apr 22, 09 10:22 pm
tyre looks like its got a gouge in it?
ticking away the moments that make up a dull day, you fritter and waste the hours in an offhand way.
steveo
Posts: 3920 Joined: Sat Apr 30, 05 11:16 amLocation: Kent
Post
by steveo Wed Apr 22, 09 10:26 pm
crikey not good .... hope there is no body damage !! yeah don't like green bearings ...for that reason ..if they are .. can't beat taper rollers , that you grease
in my opinion
..whats up with the reg
Mick70RR
Posts: 1885 Joined: Sat Apr 02, 05 8:57 pmLocation: Birmingham
Post
by Mick70RR Wed Apr 22, 09 10:46 pm
That's Alans reg on Adams car.
Derek
Posts: 7502 Joined: Sun Apr 18, 04 11:19 pmLocation: Surrey
Contact:
Post
by Derek Wed Apr 22, 09 10:51 pm
Mick70RR wrote: That's Alans reg on Adams car.
Good to see a couple of you are awake.
That's the only way they could get the RAC to take the car home
Are we there yet dad ..... 10 to the gallon but worth it.
Mick70RR
Posts: 1885 Joined: Sat Apr 02, 05 8:57 pmLocation: Birmingham
Post
by Mick70RR Wed Apr 22, 09 10:52 pm
I was just going to delete my last post.
Cannonball
Posts: 17242 Joined: Sun Apr 18, 04 11:26 pmLocation: crewe, cheshire
Contact:
Post
by Cannonball Wed Apr 22, 09 10:54 pm
i have a pair off dana half shafts
www.dwatts80.fsnet.co.uk
WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME
OFTEN OUTNUMBERED NEVER OUTGUNNED,
HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,
I HAVE A NVQW
LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,
THE PASS IS THE JUICE,
LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
Kev
Posts: 13955 Joined: Sun Apr 18, 04 11:04 pmLocation: Brisbane, Oz.
Post
by Kev Thu Apr 23, 09 12:29 am
Bit scary that it broke outside the bearing.......
<center>The name is Kev, nowadays known as Kevvy or Pommie C***!
Anonymous
Post
by Anonymous Thu Apr 23, 09 12:45 am
Mick70RR wrote: That's Alans reg on Adams car.
Ole Als gonna cherish that pic.
Well spotted Mick/Steveo
, only damage when the wheel fell off was to the arch trim , nothing a hammer won't sort.
in my opinion
, only damage when the wheel fell off was to the arch trim , nothing a hammer won't sort.