Brakes again, Dave?

Anonymous · Post by **Anonymous** » Thu Apr 23, 09 9:15 pm

Still cant seem to get a good firm pedal, been bleading it with the engine off, should i do it with it running so the vac works?

Been over all the pipes connections and made sure everythings tight and not weeping. Just cant seem to get all the air out.

Gonna try and get a vacume bleeder tomorrow.

Guy · Post by **Guy** » Thu Apr 23, 09 9:19 pm

Is this a new master cylinder or an old one or one with a new seal kit???

Guy · Post by **Guy** » Thu Apr 23, 09 9:21 pm

its ok just found it http://www.moparuk.com/forums/viewtopic.php?t=26439

forget my question

Lance · Post by **Lance** » Sat Apr 25, 09 9:59 pm

Craig, you could try blocking over night, always worked for me in the past.
pump peddle until you get good resistance then wedge in position with length of timber.
worth a go!

Anonymous · Post by **Anonymous** » Thu Apr 30, 09 11:08 pm

I didn't know that worked for cars ,I've been using that trick on bikes for years.Laccy band on lever, leave overnight ,in morning brakes bled ,miracle

cheers Doug