Allkillers 63 Fury

Ivor · Post by **Ivor** » Wed May 06, 09 1:23 pm

AllKiller wrote:Its one of things i HAVE to do before i Die Ivor

Snap!

Dave-R · Post by **Dave-R** » Wed May 06, 09 3:26 pm

Better get a move on then Ivor.

Ivor · Post by **Ivor** » Wed May 06, 09 4:33 pm

Cheers Dave, I love you too!

AllKiller · Post by **AllKiller** » Sat May 16, 09 6:35 pm

Today i removed the P/Steering box and joint that was i think i mentioned when i bought it, had been repaired in a very dodgey way

Well its worse than that...i had to show this...the joint had nt broken and been bodged,... they had cut it through at an angle, to i guess

repair/ replace the joint internals

....then forgot to add any grease anyway

and to top it off arranged a jubilee clip in a jaunty squarish fashion to hold it together

...wonder how fast they ever drove this car

...frightening, some people should not be allowed to work on ANY cars

AllKiller · Post by **AllKiller** » Sat May 16, 09 6:38 pm

I do need a coupler to fit a non power steering box now if anyone has one... its larger spline and pin through not bolt as the one shown

Blue · Post by **Blue** » Sat May 16, 09 7:32 pm

Bloody hell, that's almost like sabotage, you know it's going to fail, but not quite when....

Pete · Post by **Pete** » Sat May 16, 09 8:16 pm

Get a generic UJ from Hausers

Anonymous · Post by **Anonymous** » Wed Jun 03, 09 10:00 pm

Only just found this thread dude. Nice. Is it being altered by Tim's Gasser Cave then or are you considering my pal Tim @ roadhouseretro.com? I know Mr Roadhouse is keen to do it....

Whatever happens it will be cool. And for crying out loud douse it in metalflake and chrome.

Anonymous · Post by **Anonymous** » Wed Jun 03, 09 11:42 pm

Steve we still have the mold for the hood for 63's, dale doesn't have one, he used ours when he did our bonnet,

Anonymous · Post by **Anonymous** » Thu Jun 04, 09 1:06 pm

nice one steve,look forward to seeing this one come together.

AllKiller · Post by **AllKiller** » Thu Jun 04, 09 9:32 pm

Jerry/ Marc thanks i'll remember that when needed

Not sure yet Patina....all about Funds hence the G.N....and i feel sick even thinking about letting it go...bloody love that car.

Thanks Si, me too

Anonymous · Post by **Anonymous** » Mon Jun 22, 09 4:18 pm

Dont know if you know this crowd? but they do alot of glass panels for 62-65 cars, may help!

6th page down in link
Linky

Below the superbird stuff, they also do panels for altered cars!

mopar_mark · Post by **mopar_mark** » Mon Jun 22, 09 5:07 pm

mo_malone wrote:Dont know if you know this crowd? but they do alot of glass panels for 62-65 cars, may help!

6th page down in link
Linky

Below the superbird stuff, they also do panels for altered cars!

I have used their stuff, my glass doors were from them..... Doors needed stacks of work, still not great now.

I will never use them again & I would not recommend them, just my 2 cents as they say

AllKiller · Post by **AllKiller** » Wed Jun 24, 09 9:27 am

Thanks both for replies....

RobTwin · Post by **RobTwin** » Thu Jun 16, 11 1:18 pm

Hi Steve, any progress?

Thought you might be interested in this, if you havent already seen it.

Guy in the States doing the same with a 63 Dodge...

http://www.forbbodiesonly.com/moparforu ... hp?t=20375