A904 Tailshaft seal

Moderator: Moderators

Post Reply
User avatar
latil
Posts: 12076
Joined: Tue Feb 01, 05 10:37 pm
Location: Steve Pearson MMA/014. East Grinstead and Carmarthen.

A904 Tailshaft seal

Post by latil »

No reply to my wanted,so what I'm after is the seal for the rear of the tailshaft housing where the prop comes out. I need to change my housing before the nats as the rear bush is badly worn and I can lift the prop spline end up and down around 3/8 " I have a spare housing with a good bush,just need the seal.
1965 Belvedere 2 426 Wedge.

Climate change,global warming,the biggest tax raising scam ever devised by man for mankind.

Motivating Our People,Accelerating Rapidly.
Anonymous

Post by Anonymous »

I have one Lat I was going to fit it in the truck 904.
Then I bought jems old 904 out of his truck whch was agood one with new seals.
Unfortunatley My truck has a stubby output shaft and jems is the longer type so I cannot swap it.
I have now arranged to take the box to Blue.
So you have two choises.
You can have the jemsters box for what I paid for it £50 or you can have the rear seal for a £10.
I hope this helps.
Bob
User avatar
Ivor
Site Admin
Posts: 13000
Joined: Sun Apr 18, 04 11:11 pm
Location: The village of Evenley

Post by Ivor »

Hey Steve, if Bob's deal doesn't suit you, it's a bit obvious but you could always give Dunc or Blue a shout, they may have one on the shelf...
The pump don’t work coz the vandals took the handles.

www.ivorsroadrunner.com
User avatar
latil
Posts: 12076
Joined: Tue Feb 01, 05 10:37 pm
Location: Steve Pearson MMA/014. East Grinstead and Carmarthen.

Post by latil »

PM'ed
1965 Belvedere 2 426 Wedge.

Climate change,global warming,the biggest tax raising scam ever devised by man for mankind.

Motivating Our People,Accelerating Rapidly.
User avatar
latil
Posts: 12076
Joined: Tue Feb 01, 05 10:37 pm
Location: Steve Pearson MMA/014. East Grinstead and Carmarthen.

Post by latil »

Thanks for the seal Bob. Just finished the job,not quite as straightforward as I'd hoped :roll: Took the trans crossmember out to lower trans,went to put it back and the car had got wider by 1/8 inch,so the bolts wouldn't go in. Solved with a 4 foot sash cramp. :D
1965 Belvedere 2 426 Wedge.

Climate change,global warming,the biggest tax raising scam ever devised by man for mankind.

Motivating Our People,Accelerating Rapidly.
Anonymous

Post by Anonymous »

:lol: Thats Great Steve, Don,t forget to take the clamp off for the nats :thumbright:
NaughtyAlan

Post by NaughtyAlan »

Hey Bob, you still tasting that transmission fluid out of the truck :cry:
Dont do you noo good you no ;) :D
Anonymous

Post by Anonymous »

:roll:
User avatar
Stu
Posts: 7111
Joined: Sun Jul 31, 05 4:15 pm
Location: Shropshire, home of the worlds smallest big screen TV

Post by Stu »

:laughing3: I only logged on tonight to cheer meself up, but there's been some priceless stuff on tonight! :lol:
24 hours in a day, 24 beers in a case. Coincidence? I think not…

70 Challenger
MMA/489
NSS/435
Anonymous

Post by Anonymous »

It looked like red wine :shock:
User avatar
charger01
Posts: 3640
Joined: Thu May 26, 05 10:35 pm
Location: Adrian Jones in North Wales

Post by charger01 »

Al never took that photo unless he shot it from the waist. :D Must of been Ads spanner monkey & chief polisher No-Nuts :lol: :lol: :lol: Unless B1 Bri has been darn sarth with a camera strapped to his hard hat :D
Image
Anonymous

Post by Anonymous »

charger01 wrote:Al never took that photo unless he shot it from the waist. :D Must of been Ads spanner monkey & chief polisher No-Nuts :lol: :lol: :lol: Unless B1 Bri has been darn sarth with a camera strapped to his hard hat :D
:D :D

Get yer $$$ out this year Ade & i'll show you where the bar is. ;)
Anonymous

Post by Anonymous »

Dont do it Ade it took me two days to get over that session :oops:
Al still has not explained how she hung upside down on top that pole without
holding on with her arms or legs?
Post Reply