Use this forum for all your builds in progress.
Moderator: Moderators
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:40 pm
Dashboard repainted correct colour. Thanks to Ivor for paint
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:40 pm
Splash shield all welded up and painted
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:41 pm
Lots of suspension bits all refurbed and ready to go.
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:42 pm
Original fuel tank repaired and tank straps too
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:44 pm
Brake discs in primer. To be painted then off to be skimmed. This will be their final cut
Hopefully that will be OK. 800 bucks a piece for NOS is nuts!
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:46 pm
Radiator stripped nearly ready for painting. Need to check its the right one! Dont want to be like clivey with a C body rad!!!!!
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:48 pm
Brake drum back plates ready for - errrr, not sure yet. Originally they were black phosphated. Ive seen some engine covers that were tuftrided. A very close match for phosphate but will offer good rust resistance. Probably what i will do.
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:51 pm
Some more coated parts. Yes, i forgot to take the j nuts off
Pic shows the bits a bit light. Would have been bare metal originally.
Roger
Posts: 868 Joined: Sun Jul 29, 07 9:34 pm
Contact:
Post
by Roger » Sat Aug 15, 09 8:53 pm
For the obsevant amongst you, my rear springs are in one of the photos too. Sadly he did them black not silver. Not quite sure what to do there. Some apparantly were black, bit not when mine was built i belive?
morgan
Posts: 4226 Joined: Sat Sep 10, 05 7:22 pm
Location: Berkhamsted - Herts.
Post
by morgan » Sun Aug 16, 09 8:00 pm
Impressive stuff.
Certainly has come a long way from the pics I saw when you set my suspension up ! Keep up the good work - looks stunning.
Ivor
Site Admin
Posts: 13000 Joined: Sun Apr 18, 04 11:11 pm
Location: The village of Evenley
Post
by Ivor » Mon Aug 17, 09 10:20 am
Crack on Roger, the poor old girl was feeling neglected!
R.RUNNER
Posts: 4697 Joined: Tue Nov 27, 07 8:37 am
Location: EPSOM DOWNS, SURREY.
Post
by R.RUNNER » Sun Dec 18, 11 4:45 pm
I`M PROUD TO BE AN ENGLISHMAN.......WITH A `68 GTX