MBM disc conversion

[GeneralWee]

Bought and fitted a front end disc conversion, servo etc. for my 69 Charger, which works fine apart from the pads rattle around .The calipers are part number 4103 and 4104, single pot.Any ideas what these calipers are also fitted to so I can order a spring kit.Have phoned MBM , but they can't tell me.
Cheers

[Blue]

Look like '73 up A body single piston calipers to me, same as '73 up B body I believe.

[MrNorm]

Yes I think they are probably the slider calipers as opposed to the pin-type.
Is this them? (RAYBESTOS Part # RC4104)


If so, according to Rockauto:
CHRYSLER CORDOBA (1975 - 1979)
CHRYSLER LEBARON (1977 - 1979)
CHRYSLER LEBARON MEDALLION (1977 - 1979)
CHRYSLER LEBARON S 1978
CHRYSLER LEBARON SALON 1979
CHRYSLER NEW YORKER (1979 - 1981)
CHRYSLER NEWPORT (1979 - 1981)
CHRYSLER TOWN & COUNTRY (1978 - 1979)
DODGE ASPEN (1976 - 1979)
DODGE ASPEN CUSTOM (1976 - 1977)
DODGE ASPEN SPECIAL EDITION (1976 - 1977)
DODGE CHARGER (1973 - 1976)
DODGE CHARGER SPECIAL EDITION (1973 - 1978)
DODGE CHARGER SPORT 1976
DODGE DART 1976
DODGE DART SPECIAL 1976
DODGE DART SWINGER 1976
DODGE DIPLOMAT (1977 - 1979)
DODGE DIPLOMAT MEDALLION (1977 - 1979)
DODGE DIPLOMAT S 1978
DODGE DIPLOMAT SALON 1979
DODGE MAGNUM XE (1978 - 1979)
DODGE MIRADA 1980
DODGE ST. REGIS 1979
PLYMOUTH CARAVELLE (1978 - 1979)
PLYMOUTH DUSTER 1976
PLYMOUTH GRAN FURY (1980 - 1981)
PLYMOUTH GRAN FURY SALON 1980
PLYMOUTH SCAMP 1976
PLYMOUTH SCAMP SPECIAL 1976
PLYMOUTH VALIANT 1976
PLYMOUTH VOLARE (1976 - 1979)
PLYMOUTH VOLARE CUSTOM (1976 - 1977)
PLYMOUTH VOLARE PREMIER (1976 - 1977)


If so the anti rattle clip is available - RAYBESTOS Part # H5218

[Dave-R]

Did you tighten the outer shoe retainer flange with a hammer so the outer shoe is a tight fit on the caliper?

[Dave-R]

Picture.

[GeneralWee]

Thanks people, those do look like the calipers I have - tried the bendy flange method (that sounds rude dunnit!), but doesn't seem to work, but will try again, maybe able to get them a bit tighter, may have bent them the wrong way.
But what are the elastic bands for? I have put some round the outer pads, but they still rattle.
Have all the other parts, so will have another try.
The kit works really well for normal driving - locked the brakes up at my mates the other day and all 4 wheels locked and the car stopped straight, as it should.
Thanks

[GeneralWee]

Got the hammer out and all my rattle problems have gone - Thanks!