A-Bod 8-3/4, stamps/marks.
First piccy is/was an upside-down 'W', below the vent hole.
Second picccy, upside-down '70 date stamp' plus nice pinky writing!
Third piccy, two hand written white marks, done at different times?
bacca.
Axle Markin's
Moderator: Moderators
-
Anonymous
Axle Markin's
- Attachments
-
- A-Body axle stamp.JPG (157.94 KiB) Viewed 213 times
-
- A-Body axle markings.JPG (74.36 KiB) Viewed 211 times
-
- A-Body axle stamps.JPG (61.4 KiB) Viewed 211 times
-
Dart Vader
- Posts: 3532
- Joined: Mon Sep 03, 07 5:27 pm
- Location: Swindon MMA180
-
Anonymous
Hi Justin,
Yes indeedy!!!
Under the 40years or crud and crap was a beautiful unmolested axle!
On first appearences its a superb example of an original A-body 8-3/4.
Most A-bod axles are badly used and abused on the dragstrips of the World LOL.
Although the axles feel darn heavy when complete, the bare axle case is indeed a fairly lightweight assembly.
I would always recommend a back-brace for any dragstrip duties, with an engine of 450/500 horses!
A very good purchase!
Bacca.
Yes indeedy!!!
Under the 40years or crud and crap was a beautiful unmolested axle!
On first appearences its a superb example of an original A-body 8-3/4.
Most A-bod axles are badly used and abused on the dragstrips of the World LOL.
Although the axles feel darn heavy when complete, the bare axle case is indeed a fairly lightweight assembly.
I would always recommend a back-brace for any dragstrip duties, with an engine of 450/500 horses!
A very good purchase!
Bacca.