Parts

Moderator: Moderators

Anonymous

Parts

Post by Anonymous »

All got to

Precision Performance Hose Ends
2 x -12 90* £10.00 each
5 x -10 90* £9.00 each
7x -10 45* £9.00 each
5x -10 straights £8.00 each
2x -08 45* £8.00 each
1x -08 90* £8.00
3x -06 45* £7.00 each
1x -06 90* in black £7.00
1x -04 straight £4.00
4x -04 45* £5.00 each
4x -04 90* £5.00 each
2 x 3/8th hard line to -06 straight male (trans line adaptors) £5.00 each
5 x 3/8th hard line to -06 straight female ( as above) £5.00 each
2 x -06 to -06 45* female connectors £4.00 each
1x -06 to -06 female short straight connector £4.00
2 x Holley -06 long carb adaptors £6.00 each
1 x Demon -06 long carb adaptor £6.00
2 x Holley -08 long carb adaptor £7.00 each
7 x Holley -08 short carb adaptors £5.00 each
Demon -08 carb adaptors 1 long, 1 short £8.00
9 x -08 male T's £ 4.00 each
2 x -08 male to -08 female 90* £4.00 each
1 x 0 to 15 psi fuel regulator pressure gauge £8.00
1 x 0 to 30 psi fuel pump pressure gauge £8.00

Lots more fuel fittings, if anyone wants the lot come take a look and make me an offer

Raybestos 11x3 front brake shoes Part# 336PG £35.00
Raybestos 11x2 brake shoes Part# 280PG £30.00
B Body 66 to 70 front parking brake cable Raybestos BC92323 £20.00
Northern heater core, 70 to 74 B&E Body with aircon £30.00
Master Cylinder B body 67 to 70 with front discs, engine side outlets £45.00
Master Cylinder 73 to 75 A body with 10" drums £25.00
Alternator, double pulley, up to 70 £35.00
Alternator as above, broken brush £15.00
1 low beam,1 high beam £4.00 each
Rear diff rebuild kit 742 case £50.00
22 8 3/4 crown wheel bolts £18.00
34 3/8ths torque convertor bolts £20.00 Genuine Mopar
A&A 727 band strut £10.00
727 filter spacer £15.00
727 rear racing band £20.00
SFI approved flex plate 6 bolt crank £25.00
727 band £10.00
BHJ torque plate B & RB £80.00
Mopar performance breather P4529880 £8.00
Mopar performance rocker cover grommets pack of 7 £10.00
66 to 70 B body & 69 A body heater hose bracket £4.00
Demon rear bowl jet extension kit £5.00
MSD advance kit Part# 8464 £10.00
4 x FBO MSD advance bushing kits to give 10 and 14* £15.00
Competition Engineering back half cross member, 2x3, 60" long with a 3 1/2" drop £30.00
440 mechanical tach drive electronic distributor £35.00
Holley 4150 sec diaphragm kit part# 20-13 £8.00
used 400 timing cover £5.00
used 400 rocker covers £5.00 later type
rocker shafts with rockers £5.00
Last edited by Anonymous on Fri Aug 28, 09 8:57 am, edited 1 time in total.
Guy
Posts: 5002
Joined: Sun Apr 18, 04 10:20 pm
Location: Behind a Camera

Post by Guy »

Hi Neil what in the 742 rebuild kit pls
Anonymous

Post by Anonymous »

Guy

just checked and noticed I've stole the pinion seal out of it

so contains pinion bearings, crown wheel bearings, pinion nut, marker and sealer

£40 due to no seal
User avatar
dustymopar
Posts: 1448
Joined: Tue Aug 01, 06 6:39 pm
Location: Chelmsford

Post by dustymopar »

Neil, Put my name down for the Competition Engineering back half cross member

Ta :thumbright:
Enough is never ever enough....
User avatar
db
Posts: 8368
Joined: Sun Apr 18, 04 10:50 pm
Location: Paul McQueen , N Wales

Post by db »

Mine please!!
B Body 66 to 70 front parking brake cable Raybestos BC92323 £20.00
1 x 0 to 30 psi fuel pump pressure gauge £8.00
:thumbright:
No-one will believe you...
Anonymous

Post by Anonymous »

dustymopar wrote:Neil, Put my name down for the Competition Engineering back half cross member

Ta :thumbright:
ok mate
Anonymous

Post by Anonymous »

db wrote:Mine please!!
B Body 66 to 70 front parking brake cable Raybestos BC92323 £20.00
1 x 0 to 30 psi fuel pump pressure gauge £8.00
:thumbright:
OK Mate
User avatar
Boz01
Posts: 608
Joined: Sun Jun 24, 07 2:00 pm
Location: Leeds

Post by Boz01 »

'1 low beam,1 high beam £4.00 each'

Yes please! :thumbright:
'You can never go fast enough!'

1966 Dodge Coronet 440 c.i.
1969 Dodge Dart Custom

http://www.americansuperstock.co.uk/

Image
Anonymous

Post by Anonymous »

Niel have you got any FBO electronic ignition systems? If so how much?
MilesnMiles
Posts: 7309
Joined: Fri Nov 04, 05 8:40 pm
Location: Cornwall

Post by MilesnMiles »

Neil i'll take the A bod master cylinder for 10" drums. Give you a call later.
Anonymous

Post by Anonymous »

marc-jerryatric wrote:Niel have you got any FBO electronic ignition systems? If so how much?
Yes I've got FBO ignition kits

£125.00 inc vat

includes
ECU
Coil
Cap (brass contacts)
Rotor
Ballast
Tuning guide
User avatar
db
Posts: 8368
Joined: Sun Apr 18, 04 10:50 pm
Location: Paul McQueen , N Wales

Post by db »

Excellent goodies, thanks Wil :thumbright:
No-one will believe you...
Anonymous

Post by Anonymous »

:thumbright:
GranSport
Posts: 315
Joined: Sun Apr 18, 04 11:12 pm
Location: Egham

Jeep Voltage Regulator required

Post by GranSport »

Hi Neil, is there a number I can call you on?
Thanks
Edie Cross
07798 614931
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

Don't even know if he is still a member?

If you are after FBO stuff then look up Turnip on here.
Post Reply