72 Challenger

Adrian Worman · Post by **Adrian Worman** » Tue Feb 28, 12 10:15 pm

Thought you'd want to see the vandalism I'm currently dishing out to my yellow pig, I had to fab a new tunnel the first time I installed a 4 speed but now I'm fitting a proper E body box and linkage I have had to cut it all open again, bloody enjoyed meself tho

..................check it

Ivor · Post by **Ivor** » Wed Feb 29, 12 10:44 am

It's the Milton Keynes chain saw massacre!

latil · Post by **latil** » Wed Feb 29, 12 11:03 am

Got stuck in traffic,couldn't find the right gear.

autofetish · Post by **autofetish** » Wed Feb 29, 12 11:08 am

Bacca did warn you about that sprag

Adrian Worman · Post by **Adrian Worman** » Wed Feb 29, 12 12:49 pm

Just made a new panel at work, will tack it in place tonight and then stitch it up.......................a new trans hump from the states is 200 quid inc shipping, greedy Bananarama!

Dave81 · Post by **Dave81** » Wed Feb 29, 12 1:09 pm

Adrian Worman wrote:Just made a new panel at work, will tack it in place tonight and then stitch it up.......................a new trans hump from the states is 200 quid inc shipping, greedy Bananarama!

£200 to cover something you'll never see.......

Looks like the cars coming along nicely!

Adrian Worman · Post by **Adrian Worman** » Wed Feb 29, 12 3:00 pm

Should be back on the road by end of March Dave, new Centerforce clutch, box, prop and Suregrip, can't wait to Bananarama! little face off

Les Szabo · Post by **Les Szabo** » Wed Feb 29, 12 3:45 pm

my muzzy and the brown 340 '71 car were stick shifts......loadsa fun, loved it, not so good on the 1/4 though or if its a wet road.....hope you enjoy it as I'm sure you will

charger01 · Post by **charger01** » Wed Feb 29, 12 4:01 pm

Adrian Worman wrote:Should be back on the road by end of March Dave, new Centerforce clutch, box, prop and Suregrip, can't wait to Bananarama! little face off

You sorted that scratch on the wing yet shag?

Adrian Worman · Post by **Adrian Worman** » Wed Feb 29, 12 4:39 pm

charger01 wrote:
Adrian Worman wrote:Should be back on the road by end of March Dave, new Centerforce clutch, box, prop and Suregrip, can't wait to Bananarama! little face off
You sorted that scratch on the wing yet shag?

.....................well, not exactly................what i have done is to damage it some more so that the first scratch has got company

drewcrane · Post by **drewcrane** » Wed Feb 29, 12 4:53 pm

Adrian Worman wrote:
charger01 wrote:
Adrian Worman wrote:Should be back on the road by end of March Dave, new Centerforce clutch, box, prop and Suregrip, can't wait to Bananarama! little face off
You sorted that scratch on the wing yet shag?
.....................well, not exactly................what i have done is to damage it some more so that the first scratch has got company

Like the one on the fender

Did you use a chain saw to cut that hole?

Adrian Worman · Post by **Adrian Worman** » Wed Feb 29, 12 5:32 pm

drewcrane wrote:
Adrian Worman wrote:
charger01 wrote: You sorted that scratch on the wing yet shag?
.....................well, not exactly................what i have done is to damage it some more so that the first scratch has got company

Like the one on the fender

Did you use a chain saw to cut that hole?

No......................I used Herman, nothins safe from him!
Actually it don't look that bad in the flesh, edges look well ragged but thats where the yellow paint pinged off revealing the red oxide underneath, well thats my story anyway

Adrian Worman · Post by **Adrian Worman** » Sun Mar 04, 12 8:57 pm

Heres a pic of the roller bearing used to get you outta the Bananarama! if you have a box with the pilot spigot cut down, or an automatic crankshaft thats not machined out for a pilot bush, its from 318 and 360 magnum engines, available from any parts monkeys, this one however is very spesh and come from "Bearings by Bacca" Mopar mechanic to the stars

Adrian Worman · Post by **Adrian Worman** » Mon Mar 05, 12 12:20 pm

Heres the absolutely no cost trans tunnel, riveted into place and then tack welded all round, plastered in seam sealer and awaiting some yellow

drewcrane · Post by **drewcrane** » Mon Mar 05, 12 1:19 pm

Looks good,some paint and carpet no one will know...........except for us