Flex plate question ,

NaughtyAlan · Post by **NaughtyAlan** » Sun Jul 22, 12 10:10 pm

3 miles on a rebuilt engine? , finding odd pistons? , get yer money back , if not then name and shame although I have a good idea who built it.

, yea he can talk a good build but that's about it.

Aka Brutus.

mopar_mark · Post by **mopar_mark** » Sun Jul 22, 12 10:17 pm

NaughtyAlan wrote:3 miles on a rebuilt engine? , finding odd pistons? , get yer money back , if not then name and shame although I have a good idea who built it. , yea he can talk a good build but that's about it.

Aka Brutus.

Hello Ade

See ya at the Nats

NaughtyAlan · Post by **NaughtyAlan** » Sun Jul 22, 12 10:22 pm

1stpop wrote: cam float i had .080 thou

You mean crank end float? , again I'd be asking for my $$$$$$$'s back , don't let him get away with it.

Aka Brutus.

NaughtyAlan · Post by **NaughtyAlan** » Sun Jul 22, 12 10:25 pm

mopar_mark wrote:
NaughtyAlan wrote:
Aka Brutus.
Hello Ade
See ya at the Nats

Hi Mark how's it going? , looking forward to a beer and a catch up.

Dave-R · Post by **Dave-R** » Mon Jul 23, 12 8:45 am

NaughtyAlan wrote:
1stpop wrote: cam float i had .080 thou

You mean crank end float? , again I'd be asking for my $$$$$$$'s back , don't let him get away with it.

Aka Brutus.

I would have been knocking the money out of him.

I once did a 600 mile round trip to get £100 back off someone. Cost me that in petrol. But no way was I going to let anyone Bananarama! me over.

Blue · Post by **Blue** » Mon Jul 23, 12 5:07 pm

Probably a good thing you don't live in the States Dave, there's been a few incidents you've mentioned on here that would have seen you reaching for your gun

mopar_mark · Post by **mopar_mark** » Mon Jul 23, 12 9:29 pm

Blue wrote:Probably a good thing you don't live in the States Dave, there's been a few incidents you've mentioned on here that would have seen you reaching for your gun

Should we now call Dave..... Trigger

NaughtyAlan · Post by **NaughtyAlan** » Mon Jul 23, 12 10:04 pm

So who built it? , seems Daves itching to get his revolver out.

Post by **TyreFryer** » Mon Jul 23, 12 10:15 pm

http://www.moparuk.com/forums/viewtopic ... c&start=15

How you doing Ade, you not been on for a while?

NaughtyAlan · Post by **NaughtyAlan** » Mon Jul 23, 12 10:40 pm

I had a good idea who built that engine.

Isn't Paul500 and Bacca one and the same? , if not then appologies , seems Paul500 is blaming the parts even though the motor had different pistons and lets not forget the end float

, no getting away from it Baccy couldn't build a Bananarama! sand castle.

Aka Brutus.

mopar_mark · Post by **mopar_mark** » Mon Jul 23, 12 11:11 pm

NaughtyAlan wrote: no getting away from it Baccy couldn't build a Bananarama! sand castle.

Aka Brutus.

Not like you to water it down

NaughtyAlan · Post by **NaughtyAlan** » Mon Jul 23, 12 11:36 pm

Edit.

Aka Brutus.

Dave-R · Post by **Dave-R** » Tue Jul 24, 12 8:44 am

mopar_mark wrote: Should we now call Dave..... Trigger

OY!

Dave-R · Post by **Dave-R** » Tue Jul 24, 12 8:46 am

NaughtyAlan wrote:Isn't Paul500 and Bacca one and the same?

Well Bacca owns the Charger 500 in the name.

He wouldn't be the first (or the last) person in this club to cobble an engine together and cut corners. Which is why it is key to know exactly what parts you are getting and to see it at every stage of construction.

The best route is to get the short block built and then assemble everything else yourself. That way you can check the short block first.

Even someone I trust and with a good reputation like Geof Hauser. He offered to build my complete engine. But I said no to that. Just the short block. When it comes to something as important and expensive as an engine I would rather check everything with my own eyes.

1stpop · Post by **1stpop** » Tue Jul 24, 12 8:49 am

i can see why they call you naughtyalan

i have not actually said who built what , they seem to have done it for me .
your right im not happy it was not the dearest job by a long shot , but i thought said person was a good guy , it could have been resolved a lot quicker and easier if i could have got hold of them and let them explain.
but to ignore me has got my goat up.
for those that know me it takes a little while for me to get wound up , then i explode