Correct or recommended toe in/tracking dimensions

Pete · Post by **Pete** » Sat Aug 24, 13 8:08 pm

Good spot, Rob; likin' those:

http://www.mandhtires.com/M-H-Front-Runner/4.5-26-15

Not sure if Chris does tyres anymore, though...

shovelheadrob · Post by **shovelheadrob** » Sat Aug 24, 13 8:19 pm

Pete you have mail.

Dave81 · Post by **Dave81** » Sat Aug 24, 13 9:04 pm

Cheers Ade, Roger!

Adrian Worman · Post by **Adrian Worman** » Sat Aug 24, 13 9:21 pm

Demon James wrote:
Adrian Worman wrote:
Demon James wrote: Excellent job Miles, I was just about to ask the very same question this weekend as Im re-newing the front end due to worn bushes etc
If you've had the uca's off then I would suggest driving it to Rogers place near Horwood and get the alignment set up properly, you'll be amazed at the results
I'm not committed to anyone yet Ade but did speak to Kempston Radiators (Garage dept) as they did digital; 4 wheel alignment on my Disco 3 and it was awsome. They say they can do a 71 Dodge A-Body but maybe Roger would be better with knowledge?

Yes James mate, Rog knows mopars and how much to dial in and more importantly what you need to do to the rest of the hardware to get to where you want it.
He can supply your parts too

About 15 minutes from my office

Blue · Post by **Blue** » Sat Aug 24, 13 9:30 pm

My personal favourite,
http://www.cokertire.com/brands/pro-tra ... unner.html

Demon James · Post by **Demon James** » Sat Aug 24, 13 10:15 pm

Cheers Ade, will do. Think I'll trailer it over cos after I'VE put it back together it might only turn one way and I'll be back at my house before I know it