master cylinders interchangebiltiy

John · Post by **John** » Wed Jan 29, 14 4:47 pm

I want a knew master cylinder for the Coronet and wondered if the years were compatible. It's a 67 with power drums with the lines feeding to o the fender side. I think Imay have a later one anyhow as the cap is held on with a wire clip without the aid of a bolt in the middle but wanted to check before ordering.

Post by **MattH** » Wed Jan 29, 14 9:12 pm

Description sounds the same as my 73 Challenger, a large and a small reservoir which are totally seperate, one pipe out of each towards the fender.

Mossy68 · Post by **Mossy68** » Wed Jan 29, 14 10:18 pm

Hi John.
My 68 power brake is a midland Ross type ( bolt down cover )
I would think yours should be the same ( originally )
Where you buying from ?

John · Post by **John** » Wed Jan 29, 14 10:41 pm

Thanks chaps,

Not sure yet Gary.

Mossy68 · Post by **Mossy68** » Wed Jan 29, 14 10:48 pm

Was quoted £175+vat for M/C and booster from Customville
Don't know how others price up ?

Guy · Post by **Guy** » Thu Jan 30, 14 9:07 am

http://www.summitracing.com/int/search/ ... and/dorman

The top one which i believe would be correct for yours John only $88 to your door inc vat duty etc

John · Post by **John** » Thu Jan 30, 14 11:49 am

Thanks Guy,

I did look at these but wasnt sure if it was the correct one.

Maybe I should just go for it

John · Post by **John** » Thu Jan 30, 14 12:33 pm

OK - Ordered from Summit

steveo · Post by **steveo** » Thu Jan 30, 14 1:42 pm

Guy wrote:http://www.summitracing.com/int/search/ ... and/dorman

The top one which i believe would be correct for yours John only $88 to your door inc vat duty etc

yeah that's the one I have , now

the other type with the lid held on with wire spring clamp thingies , are / were , a1 cardon / raybestose repop version