540 merlin block with world products iron 'Grumpy Jenkins ' heads, comp mechanical roller cam with around .680 lift ( I forget the rest the cams been in the engine for years when I had it in another car) compression ratio is around 9.3-1 , I wanted the compression this low as I like to put regular unleaded in the tank rather than super, early 70's edelbrock C427 intake which is a low rise dominator intake but I have an adaptor to run a regular square bore 1000cfm Holley , the car is very very basic even down to having a mechanical stock looking fuel pump and steel fuel lines, all the suspension is completely stock apart from traction bars as I like 'period parts ' most things on it like the gauges and the valve covers etc are all old school, it has a Th400 with a 3000 stall coan converter and a DANA 60 rear end with 3.54 gears, it runs 10.60's at around 127-129mph on the motor on regular unleaded. The wheels are 15x3.5" Fentons on the front with 215-75-15 pro tracs and 15x8.5" Americans on the back with L60-15 pro tracs. The car still has the factory manual drum brakes all round which work fine although with the pro tracs on the front the steering is more like piloting a small water craft but as I think it looks cool I'm not too bothered
