e-body dynamat

Lincrafts.com · Post by **Lincrafts.com** » Thu Aug 25, 16 3:03 pm

Could anyone out there with an e-body who has installed dynamat tell me how much was used, pack size etc. Seen some on Amazon at what looks like a good price and the guy has good feed back.

Oh and no Two Ronnies type answers please, you know 4 packs and I had 2 left over as well !!
Thanks

mustangbooks · Post by **mustangbooks** » Thu Aug 25, 16 7:55 pm

I used one of these packs:

http://www.moss-europe.co.uk/dynamat-su ... 90521.html

...but then I only did the front and rear footwells, so if you're planning to do the transmission tunnel, doors etc etc, you will obviously need more!

Lincrafts.com · Post by **Lincrafts.com** » Thu Aug 25, 16 9:17 pm

mustangbooks wrote:I used one of these packs:

http://www.moss-europe.co.uk/dynamat-su ... 90521.html

...but then I only did the front and rear footwells, so if you're planning to do the transmission tunnel, doors etc etc, you will obviously need more!

Thanks for that, we were thinking of doing the whole floor area so will definitely need more. Price seems good but I couldn't find the size of the sheets to compare. Probably staring me in the face

Did you notice a difference?

mustangbooks · Post by **mustangbooks** » Thu Aug 25, 16 10:00 pm

I haven't noticed a huge difference tbh, but then I wasn't expecting a huge difference with the amount I covered, and the car isn't that loud anyway... The details are on the main US Dynamat site:

http://www.dynamatstore.com/index.php?l ... _list&c=28

... the kit I got contains three "18" x 32" (457mm x 812mm) pieces of Dynamat SuperLite. Total Coverage: 12 ft. sq. (1.1 m sq.)"

One piece each for the front footwells, cut the other piece in half for the rear ones IIRC.

Bilko · Post by **Bilko** » Thu Aug 25, 16 10:25 pm

I did the entire floor in my Cuda and used one of these packs:

http://www.deadening.co.uk/products/dyn ... k-dyn10455

I did run out and had to buy 3 loose sheets on eBay to finish the job, so that should give you an idea.

Lincrafts.com · Post by **Lincrafts.com** » Thu Aug 25, 16 11:54 pm

Bilko wrote:I did the entire floor in my Cuda and used one of these packs:

http://www.deadening.co.uk/products/dyn ... k-dyn10455

I did run out and had to buy 3 loose sheets on eBay to finish the job, so that should give you an idea.

That's great, it's the same size pack on Amazon.
Thanks

Bilko · Post by **Bilko** » Fri Aug 26, 16 7:49 am

Bit cheaper on eBay:

http://www.ebay.co.uk/itm/DYNAMAT-XTREM ... xyx0JTidvy

Lincrafts.com · Post by **Lincrafts.com** » Fri Aug 26, 16 9:30 am

Bilko wrote:Bit cheaper on eBay:

http://www.ebay.co.uk/itm/DYNAMAT-XTREM ... xyx0JTidvy

Thanks, that saves me looking!!

Lincrafts.com · Post by **Lincrafts.com** » Sun Sep 11, 16 10:09 pm

Took it out today after Robin fitted the Dynamat and new carpet and pleased to say it did make a difference.