Early Mopar Thermostat Housing/Outlet

Motorama · Post by **Motorama** » Tue Jan 10, 17 11:22 am

I need the hose outlet from the intake to the top hose on a 57 Plymouth 301. Im led to believe theyre mostly the same from the 50s to the 70s> Any one know if thats true and where i might get the correct one

Blue · Post by **Blue** » Tue Jan 10, 17 12:07 pm

Hard to make out in your photo, is it just the rad hose coming off the thermostat housing or is that heater hose connected to it as well?

Motorama · Post by **Motorama** » Tue Jan 10, 17 1:24 pm

Blue wrote:Hard to make out in your photo, is it just the rad hose coming off the thermostat housing or is that heater hose connected to it as well?

was the only pic i had and the cars stored away from home at the mo, the heater hose comes off the inlet manifold just below the thermostat housing. The housing fitted is pretty rusted at the end and the hose is only just held on the last bit of good metal

Blue · Post by **Blue** » Tue Jan 10, 17 5:34 pm

In that case a later one should work, I think I've got one I'll have a look when I get 5...

Motorama · Post by **Motorama** » Tue Jan 10, 17 5:37 pm

Blue wrote:In that case a later one should work, I think I've got one I'll have a look when I get 5...

Cheers, i'll get a better pic of it over the next few days