Exhaust systems

Moderator: Moderators

Post Reply
User avatar
Trigger_Andy
Posts: 7867
Joined: Sun Apr 18, 04 10:27 pm
Location: Stavanger, Norway

Exhaust systems

Post by Trigger_Andy »

On the subject of Silencer's. I will be needing to build an exhaust system from the Headers back. I would like to use stainless and have seen diy kits before, does anyone know of a company that does these? Or secondaly does anyone know where to buy Flowmaster's here in the UK.

If anyone has a better idea on how to go about building a system Id like to hear it too.
Anonymous

Post by Anonymous »

Webster race Engineering are agents for Flowmasters.

http://www.webster-race-engineering.co. ... master.htm

about ?75 a piece for DeltaFlow40s. I got mine on an offer from Summit, shipped a lot cheaper :).

Will has Spin Tech mufflers;
http://www.usaimports.co.uk/FBO_Pages/s ... fflers.htm
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

User avatar
Trigger_Andy
Posts: 7867
Joined: Sun Apr 18, 04 10:27 pm
Location: Stavanger, Norway

Post by Trigger_Andy »

Cheers guys!! Does anyone know how much it is to import a full system from the headers back is?
Anonymous

Post by Anonymous »

I just got mufflers, I think it was about ?50 by fast UPS (they are heavy).

why not find a bending shop to fabricate the tubes?
User avatar
Trigger_Andy
Posts: 7867
Joined: Sun Apr 18, 04 10:27 pm
Location: Stavanger, Norway

Post by Trigger_Andy »

Hi neil,
was that mufflers from the States? What kind did you go for and who did you buy through? Oh and do you mind if I ask how much you paid for them? Did you have to pay imoprt tax?
Anonymous

Post by Anonymous »

DeltaFlow40s from SUMMIT, special at $50 each.

Tax - oh yes :evil:

got my front tubes bent up at a local shop in stainless.
User avatar
Trigger_Andy
Posts: 7867
Joined: Sun Apr 18, 04 10:27 pm
Location: Stavanger, Norway

Post by Trigger_Andy »

That looks realy good neil!! Did the shop do the whole system from the header's/manifold back? If so how much did it set you back? If I could get the same boxes from Summit for $50.00 each that would be well cool.
Anonymous

Post by Anonymous »

Summit mufflers about $80 at the moment;
http://store.summitracing.com/default.a ... p&N=400238

from manifold to muffler in stainless was ?200, but I reckon I got a bargain cos it took them longer than expected :) The guy that runs the place is into Americans (so that helps). Over axle was newish in aluminised so I left it alone. If you`ve got headers, it would be a breeze, as its the downpipes that are tricky.
Anonymous

Post by Anonymous »

for the record, here`s the tail pipes and stainless tips they put on for me.
User avatar
Trigger_Andy
Posts: 7867
Joined: Sun Apr 18, 04 10:27 pm
Location: Stavanger, Norway

Post by Trigger_Andy »

Nice one Neil, thanks for the info and pic's. Ill see about a price from my Local (well 80 miles away) Shop. Thats the problem with living this end of Scotland there's never anything local!!
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

That place Neil used is not that local. It must be oooh.....maybe 4 miles from my house. :D

To get there you gan alang the Scotswood Road (it's on the way to Blaydon).

You can sing that last bit if you like. :lol:
Anonymous

Post by Anonymous »

in your best Geordie accent :D


The Blaydon Races

I went to Blaydon Races
Twas on the 9th of June
Eighteen Hundred and Sixty Two
On a Summer's Afternoon
I took the bus from Balmbras
And she was heavy laden
Away we went along Collingwood Street
That's on the Road to Blaydon

Oh me lads, you should've seen us gannin
Passing the folks along the road
And all of them were starin'
All the lads and lasses there
They all had smilin' faces
Gannin along the Scotswood Road
To see the Blaydon Races

We flew past Armstrong's factory
And up by the Robin Adair
But gannin ower the Railway Bridge
The bus wheel flew off there
The lasses lost their crinolenes
And veils that hide their faces
I got two black eyes and a broken nose
In gannin to Blaydon Races

Oh me lads...

Now when we got the wheel back on
Away we went again
But them that had their noses broke
They went back ower hyem
Some went to the dispensary
And some to Doctor Gibbses
And some to the infirmary
To mend their broken ribses

Oh me lads...

We flew across the Chain Bridge
And into Blaydon Toon
The bellman he was calling then
They called him Jackie Broon
I saw him talking to some chaps
And them he was persuadin'
To gan and see Geordie Ridley's show
At the Mechanics' Hall in Blaydon

Oh me lads...

Now when we got to Paradise
There were bonny games begun
There were four and twenty on the bus
And how we danced and sung
They called on me to sing a song
and I sung 'em 'Paddy Fagan'
I danced a jig and I swung me twig
The day wi' went to Blaydon

Oh me lads...

The rain it poured down all the day
And made the ground quite muddy
Coffee Johnny had a white hat on
Shouted 'Wee stole the cuddy?'
There were spice stalls and monkey shows
And old wives selling ciders
And the chap on the ha'penny roundabout
Saying 'Any more lads for riders?'

Oh me lads... (to fade)
http://www.tomorrows-history.com/Commun ... 0Races.htm
User avatar
Trigger_Andy
Posts: 7867
Joined: Sun Apr 18, 04 10:27 pm
Location: Stavanger, Norway

Post by Trigger_Andy »

Cos Im a cheapscate I went ahead and bought these. Well I am skint after buying the Barracuda and paying for the petrol to drive home! :lol:

http://store.summitracing.com/default.a ... p&x=10&y=3

With a bit of bending I think they will fit quite nicely, I hope :cry:

I threw these in as well.

http://store.summitracing.com/default.a ... .asp&N=210
Post Reply