SSBC

Anonymous · Post by **Anonymous** » Sun Jul 23, 06 9:30 pm

Iv'e got SSBC disc brakes all round,problem is,there rubbish.(wish I could swear) Does anyone know if it matters what resivoir you use for the front brakes,ie front or rear resivoir.SSBC say if you have a ford,use the rear resevoir for front brakes,or if you have a GMC,visa versa.BUT THEY DON'T TELL YOU WHAT ONE TO USE FOR A MOPAR.

To be honest,the ant hill mob could stop quicker .Actually,come to think about it,I might cut a few holes through the floor.

Anonymous · Post by **Anonymous** » Mon Jul 24, 06 9:32 am

Hmmm strange Adam, I've the same set up and mine seem ok (although Ive had nothing to compare them against) If your at the Nats look me up and have a look at mine. We can have a drive and compare notes.

Matt · Post by **Matt** » Mon Jul 24, 06 9:57 am

SSBC kit on my 68 Coronet works a treat - I've found SSBC's own tech helpline to be good in the past .

Anonymous · Post by **Anonymous** » Mon Jul 24, 06 10:56 pm

Phill440 wrote:Hmmm strange Adam, I've the same set up and mine seem ok (although Ive had nothing to compare them against) If your at the Nats look me up and have a look at mine. We can have a drive and compare notes.

Thanks mate,they do seem a bit better now the lines have been reversed.They actually LOCK UP.

Pete · Post by **Pete** » Mon Jul 24, 06 11:17 pm

So which way round did you configure them?

Did you use your origianal (drum bake) proportioning valve?

Anonymous · Post by **Anonymous** » Tue Jul 25, 06 12:18 am

HI Pete,I have front & rear SSBC set up,which have been fitted as per instructions.Problem was the front brake lines went to the front resevoir,when they should go to the back.Anyhow,I have changed them round & they work a lot better.Haven't really tested them properly,as it was nearly 10 o'clock tonight before I cleaned up.Will try them out tomorow.

Pete · Post by **Pete** » Tue Jul 25, 06 12:22 am

Cool, look forward to the "Road test" report.

Anonymous · Post by **Anonymous** » Tue Jul 25, 06 12:31 am

Sorry Pete,I bought a new proportionate valve with the kit