Posted: Sat Mar 22, 14 9:47 pm
Dont tease me big fella 
Mopar Muscle Association UK
The premier Mopar club in Europe!
https://moparuk.com/forums/
Steves 66 Sport FuryIII
Page 14 of 32
Posted: Sun Mar 23, 14 11:09 pm
Frustrating day with my indicator bulb holders (now worked out that I need new ones) but did manage some fettling just to round the day off......
Posted: Sun Mar 23, 14 11:20 pm
minto steve
she will be a nice machine when your done and a odd ball to,
she will be a nice machine when your done and a odd ball to,
Posted: Sun Mar 23, 14 11:27 pm
Thanks Dunc.....had to finish on a high today....wasted a ton of time trying to fix the holders!! Managed to get both tailights in as well...better condition than the old ones, especially the lenses
Posted: Mon Mar 24, 14 7:02 am
keep it up fella
detail what kit and Technics you used
detail what kit and Technics you used
Posted: Mon Mar 24, 14 2:03 pm
Chrome envy........ 
Is the rear bumper in good condition Steve?
Will look great when bolted back on!!
Is the rear bumper in good condition Steve?
Will look great when bolted back on!!
Posted: Mon Mar 24, 14 11:43 pm
Will....its all just cosmetic stuff at the mo..no technique mate, just elbow grease and rattle cans 
soon as I do something meaningful I will go into more detail.
Dave...rear bumper is average at best mate, though straight.Chrome is very dull and pitted on the front. If I was doing race rep, I would be tempted to paint them alu silver but just seems a bit 'wrong' if you get my drift.
Soon as Ive got my air tools up and running I will get stuck into the trunk
soon as I do something meaningful I will go into more detail.Dave...rear bumper is average at best mate, though straight.Chrome is very dull and pitted on the front. If I was doing race rep, I would be tempted to paint them alu silver but just seems a bit 'wrong' if you get my drift.
Soon as Ive got my air tools up and running I will get stuck into the trunk
Posted: Thu Apr 03, 14 1:15 pm
Quick update of recent work done over past couple of weeks...
Front grill and radiator support freshened up, holes in leading lower corners of both doors repaired and painted, work started on rewiring front indicator circuit (think switch is kaput) and finally started on the trunk. Rot cut out and bit more work than I thought to be done. Im going to replace the lower rear sections of the rear quarters while Im at it. They have been badly repaired in the past so will cut all the old patching out and weld new sections in before I finish the trunk floor. I may put the new internal drop off sections in while the outer sheet metal is off...think it will be easier...watch this space!
Big thanks to Will for his recent generosity. Went to see his Charger last week and he donated a full dual circuit brake set up for me to use to upgrade mine from single circuit to dual circuit. Thank you very much Will....you are a gent, and a talented guy!
Finally, thanks to Dunc for some little bits n bobs to keep me going...new (old but better than mine) door handles on and indicator harnesses being adapted to fit when my rewire is done....few pics
cheers Steve
Front grill and radiator support freshened up, holes in leading lower corners of both doors repaired and painted, work started on rewiring front indicator circuit (think switch is kaput) and finally started on the trunk. Rot cut out and bit more work than I thought to be done. Im going to replace the lower rear sections of the rear quarters while Im at it. They have been badly repaired in the past so will cut all the old patching out and weld new sections in before I finish the trunk floor. I may put the new internal drop off sections in while the outer sheet metal is off...think it will be easier...watch this space!
Big thanks to Will for his recent generosity. Went to see his Charger last week and he donated a full dual circuit brake set up for me to use to upgrade mine from single circuit to dual circuit. Thank you very much Will....you are a gent, and a talented guy!
Finally, thanks to Dunc for some little bits n bobs to keep me going...new (old but better than mine) door handles on and indicator harnesses being adapted to fit when my rewire is done....few pics
cheers Steve
Posted: Thu Apr 03, 14 1:18 pm
Few more.... cheers
Posted: Fri Apr 04, 14 8:54 am
Christ Steve there is no stopping you now, well done son car is going to be a cracker mate.
Posted: Fri Apr 04, 14 9:41 am
Great work Steve, and done outside as well, fair play to you.
Posted: Fri Apr 04, 14 11:36 am
yep nice one,its great your not letting the state of that rear end phase you,,,,,,,,
Posted: Fri Apr 04, 14 1:08 pm
Great stuff Steve, good to see you getting stuck in!
Posted: Fri Apr 04, 14 5:39 pm
Thanks men, taking her to bits is easy ....its the putting back together bit thats hard!
I got hold of some 18 gauge sheet steel this morning. All marked up for folding andr bead rolling tomorrow morning. Dug the rear quarters out of storage (came with car). Will use the lower sections. Will cut them out before I fit the trunk floor so I can get right in to the corners of the drop off sections which will be exposed when the lowers are cut out.Bit daunting but its all about learning!
Just waiting for a couple of bits to arrive so I can get on with the indicator wiring. Want to move the side lights up into the headlamps while Im at it. Busy times ahead!
Will post some pics up when panels done tomw.
Cheers Steve
I got hold of some 18 gauge sheet steel this morning. All marked up for folding andr bead rolling tomorrow morning. Dug the rear quarters out of storage (came with car). Will use the lower sections. Will cut them out before I fit the trunk floor so I can get right in to the corners of the drop off sections which will be exposed when the lowers are cut out.Bit daunting but its all about learning!
Just waiting for a couple of bits to arrive so I can get on with the indicator wiring. Want to move the side lights up into the headlamps while Im at it. Busy times ahead!
Will post some pics up when panels done tomw.
Cheers Steve
Posted: Sun Apr 06, 14 7:12 pm
Busy weekend on the Fury.....some progress in the trunk.....
Went over to see Will as he has the kit to roll beads into my floor panels. Was a learning curve for both of us and to be honest, Will did all the thinking stuff and I just turned the handle on the machine. Was a great day and lovely breakfast....thankx as always Will. Was a good laugh mate!
Very pleased with the results. Got a bit done today but struggled to weld much as its been windy. Got the cross braces in for the centre section but they are not strong enough to tame the ripple in the panel (due to beads) so will have to add some shallow box section across the bottom to strengthen it all up later in the week.
Anywhere that is to be welded has been coated in weld through primer ready for a still day....rest in red oxide. Glad I havent got a garage to work in as I would bd out there till midnight!
Cheers Steve
Knackered now
Went over to see Will as he has the kit to roll beads into my floor panels. Was a learning curve for both of us and to be honest, Will did all the thinking stuff and I just turned the handle on the machine. Was a great day and lovely breakfast....thankx as always Will. Was a good laugh mate!
Very pleased with the results. Got a bit done today but struggled to weld much as its been windy. Got the cross braces in for the centre section but they are not strong enough to tame the ripple in the panel (due to beads) so will have to add some shallow box section across the bottom to strengthen it all up later in the week.
Anywhere that is to be welded has been coated in weld through primer ready for a still day....rest in red oxide. Glad I havent got a garage to work in as I would bd out there till midnight!
Cheers Steve
Knackered now