Page 1 of 1
Upper Ball Joint Removal
Posted: Sat Jul 07, 07 1:18 pm
by TyreFryer
Does anybody have the tool for removing the upper balljoint from the arm on a B body that I could borrow? Or has anybody found an alternative way of doing it?
Cheers.
Posted: Sat Jul 07, 07 1:23 pm
by Kev
Don't fanny around trying different methods. Only use the correct socket and a long old breaker bar. I'm sure someone will be along soon with the correct tool. I take it the A-arm is still on the car (That's a good thing
)
Make sure a previous gorilla hasn't welded them in.......
Posted: Sat Jul 07, 07 1:40 pm
by TyreFryer
A arm is still on the car Kev, can't see any welding. The new ball joints have a VERY shallow thread, is this right?
Posted: Sat Jul 07, 07 2:09 pm
by Kev
Yep! Sort of cuts itself. When I got mine I thought someone was 'aving me on and selling me some old secondhand shagged ones tarted over!
Posted: Sat Jul 07, 07 4:01 pm
by Mick70RR
I made a socket to get them on and off. They are very tight and the arm may need to be warmed up to get them off.
Posted: Sat Jul 07, 07 6:34 pm
by Anonymous
Nice work there Mick , welding looks good too.
Martin , i have the tool if you wanna pick it up.
Posted: Sat Jul 07, 07 8:28 pm
by TyreFryer
Love the tool Mick, I need to get some welding gear.
Thanks very much for the offer Adam, I picked one up from Blue this afternoon so I'm OK now but appreciate the offer.