Mopar Muscle Association UK

I cooked my clutch the other week at shakey the clutch plates will clean up OK but the flywheel, floater and pressure plate need to be refaced also the floater has warped by 0.012"so does anyone know where i can get them sorted prefer the South London, Surrey area as I like to drop it off and pick it up. And it needs to be done quick so it can be ready for the Nats. Also need a pilot bearing and clutch release bearing:thumbright:

give "sutton rebore" a ring mate, they might do it or at least point you to someone who will.

Or try Real Steel, Middlesex, 01895 440505

GTXJim wrote:I cooked my clutch the other week at shakey the clutch plates will clean up OK but the flywheel, floater and pressure plate need to be refaced also the floater has warped by 0.012"so does anyone know where i can get them sorted prefer the South London, Surrey area as I like to drop it off and pick it up. And it needs to be done quick so it can be ready for the Nats. Also need a pilot bearing and clutch release bearing:thumbright:

Have you asked Andy Robinson ? I'm sure he can sort it for you, worth a telephone call.
I am going there Weds /Thurs next week, to pick up my Prop. If you can get it to me, Icould always drop it over if you want, to save you a journey.

I tried Sutton rebore and they are closing for there annual hol's on Tuesday I'm give Andy a call if he can sort it I'll try and get down to you Mark

jim any machine shop with a surface grinder could sort that surely, put the bits in yer mtr and cruise your local ind estate,
hope you get your head round this clutch lark save me the trouble, best o luck mate