VECTORS

Anonymous · Post by **Anonymous** » Wed Apr 08, 09 8:42 pm

Got me self a set of GENERAL LEE VECTORS, do i need them ofset washer things and then wheel nuts or just wheel nuts?

Holes are oval shape you see.

Anonymous · Post by **Anonymous** » Thu Apr 09, 09 7:47 am

If the stud holes are oval it sounds like you have unilug wheels which means you will need the eccentric washers.

Either that or they are all really worn

Anonymous · Post by **Anonymous** » Thu Apr 09, 09 9:35 am

Speak with TIM at raceways He should have them Craig

Anonymous · Post by **Anonymous** » Thu Apr 09, 09 9:53 pm

Cheers, will give raceways a ring after the bank holiday.

Anonymous · Post by **Anonymous** » Fri Apr 17, 09 10:10 pm

Spoke to tim, poped over to his place with me wheel and he sorted me out with the washers and new nuts.

Top fella.

Mick70RR · Post by **Mick70RR** » Fri Apr 17, 09 10:46 pm

CRAIG wrote:Spoke to tim, poped over to his place with me wheel and he sorted me out with the washers and new nuts.

Top fella.

Nice guy, just don't let him balance your wheels, unless you want Europe's yearly lead quota on your wheels and a mysterious vibration at speed.

Anonymous · Post by **Anonymous** » Fri Apr 17, 09 10:52 pm

Got them ballanced at a local tyre place just down the road from me, gonna take it there soon to have the front suspension set up better. at the moment if you go over 80mph it goes a bit scarey and your in the other lane.