Hand brake cable lay out ????

Anonymous · Post by **Anonymous** » Thu Jul 16, 09 10:48 pm

need either pictures or detailed digrams of the hand brake cable layout on an a body........

dustymopar · Post by **dustymopar** » Thu Jul 16, 09 11:02 pm

Here is the rear part - outer cables are attached to a bracket located on the inside of the chassis rail.

Can take others if you need them

Anonymous · Post by **Anonymous** » Thu Jul 16, 09 11:12 pm

more is possible please dusty, need some of the front sections more.

cheers mate

dustymopar · Post by **dustymopar** » Thu Jul 16, 09 11:15 pm

Pete, I'll try n take some tomorrow morning before I go out

Will email them to you

dustymopar · Post by **dustymopar** » Fri Jul 17, 09 9:42 am

You have PM

Mick · Post by **Mick** » Mon Aug 10, 09 4:13 pm

Pete
It depends on which setup you have, one runs down one side and splits in front of the axle and the other splits near the front, comes down both sides with 2 shorter cables at the back.
I would think yours would be like Mark's due to the model being the same year.
If it's like the later Duster, i made most of the fittings for mine and if Mark doesn't sort you out, pm me and i'll try and help you.
Mick