torque settings on a 440

charger01 · Post by **charger01** » Fri Jun 10, 05 7:38 pm

Changing the head gaskets on the Charger,What do i Torque the head bolts down at? (440 RB)

Adrian

Anonymous · Post by **Anonymous** » Fri Jun 10, 05 8:11 pm

my book says 70 ft lbs i did mine in 3 goes 20-50 then 70

charger01 · Post by **charger01** » Fri Jun 10, 05 8:43 pm

Thanks Dave ,will do just that once the skin has grown back over my knuckles

Prothed · Post by **Prothed** » Fri Jun 10, 05 8:48 pm

Daves right as usual. Here you go. (Hope image isnt too big).

Anonymous · Post by **Anonymous** » Fri Jun 10, 05 9:12 pm

Thats big

charger01 · Post by **charger01** » Fri Jun 10, 05 9:45 pm

THATS GREAT MATE,WHEN I FINISH WITH IT ,I WILL USE IT AS A CAR COVER

Rich · Post by **Rich** » Fri Jun 10, 05 10:28 pm

Thats huge!!!

Prothed · Post by **Prothed** » Sat Jun 11, 05 8:37 am

err... yes it is a bit big, still -
If you right-click on it and select 'save picture as...'
then you can save it to disk, open it in some handy graphics viewer and print it on A4.