Page 1 of 1
dimension windscreen
Posted: Sun Oct 09, 11 8:18 pm
by Anonymous
does anyone knows the different dimensions of the dodge dart and the dodge dart sport? 1967 -1976
got a new windscreen from the states, and it doesnt fit
thanks chris
Posted: Sun Oct 09, 11 8:50 pm
by DaveBishop
I am not sure but I think for some reason the 67 dart screen is different to the later ones. They didn't make Dart Sports until after 1969. There is a difference in the two door and four door the for door screen is bigger
Posted: Sun Oct 09, 11 9:13 pm
by PaulR
I think that there are 3 different Dart screens. One for 4 door models that only fit these. Another for 2 door hardtops that fit 2 door Darts (not Dart Sport or Demon) and 2 door Plymouth Scamps and 67/9 Barracuda The final version fits Dart Sport /Demon and Plymouth Duster. Some of the US sites are not too clear on this. Don't have the dimensions though I'm afraid.
Posted: Tue Oct 11, 11 7:42 am
by Anonymous
if anybody is interessted...
dart from 67 -76:
(measured in the middle)
about 20,5 inches high
and 54,5 wide
dart sport/duster
21,9 high
53,3 wide
i dont know know if there is another screen for 4-door darts? these two screens are the only i could found for a dart.
cheers
chris
Posted: Tue Oct 11, 11 8:14 am
by DaveBishop
I know a 4 door don't fit a two door tried it
Posted: Tue Oct 11, 11 9:29 am
by Guy
Nether does a 2 door sedan fit a 2 door hardtop, the sedan version is taller, if you find one of these I will have it!
Posted: Tue Oct 11, 11 10:28 am
by Dave999
68 hard top doesn't fit 68 4 door sedan
well in oz it doesn't
69 and 70 cars in oz used 68 US/canadian body with aussie improvments
another chap on the aussie board in in same circumstances
Dave
Posted: Fri Oct 28, 11 2:27 pm
by Guy
I have also just found out that a Australian four door 68 Valiant does not fit a US version they are the same height but about 1 1/2 " narrower
So I am now on the lookout for a four door screen
Posted: Fri Oct 28, 11 2:31 pm
by Jon Connolly
Guy
I thought my Valiant screen was the same as yours ???
Posted: Fri Oct 28, 11 2:46 pm
by Guy
It maybe Jon as yours was the US version the Australian Valiant is defiantly different. The new screen rubber I got for mine, fits the hole in the body but is way too big for the screen
Posted: Fri Oct 28, 11 3:41 pm
by Jon Connolly
You`re welcome to have mine to see if it fits ( if you`ll pardon the expression )
Posted: Fri Oct 28, 11 6:00 pm
by Guy
oh er, it would be worth a try Jon, It does list the same gasket (fw691) for the 2 door Dart sedan and the Valiant so it should fit.
Posted: Sat Nov 05, 11 11:24 am
by Guy
I have done a little more digging Jon and can confirm that your glas shoud fit mine as;
1967 & 1968 DODGE DART 2 DOOR SEDAN
1967-1975 DODGE DART 4 DOOR SEDAN
1967-1969 PLYMOUTH VALIANT 2 DOOR SEDAN
1967-1975 PLYMOUTH VALIANT 4 DOOR SEDAN
all use the same glass.
Can you pm me a price and then I will have to try and get it off of you, maybe I could meet you somewhere if you happen to be going to Duncs or something
Posted: Sat Nov 05, 11 11:31 am
by Kev
If you want a refund, Guy, the beer is in my fridge waiting!
Posted: Sat Nov 05, 11 11:34 am
by Guy
Cheers Kev
might take you up on that one day
