Headliner fitting advice

DaveD · Post by **DaveD** » Sat Jan 12, 13 7:08 pm

We are attempting to fit a headliner in a 68 Charger. There is good tension in the front and centre sections, but we are a bit of a loss in relation to the sail panel section.

As the car was a bare shell, we don't know if we are missing parts / items to secure the headliner section.

Any help, tips, advice, links or photos would be very welcome.

Thank you

Dave

Richard Granger · Post by **Richard Granger** » Sun Jan 13, 13 8:34 am

hi Dave i've just fitted headliner on my 70 road runner , my sail panels are a bit different to the chargers but i made new ones from 2mm birch ply they hold in place with a door card type trim clip , theres a good video on youtube just search for FITTING A BOW TYPE HEADLINER this shows the charger sail panel in part 1 or part 2

MilesnMiles · Post by **MilesnMiles** » Sun Jan 13, 13 2:28 pm

I've got to do this job soon too. There is an article on the net which maintains that you start at the back ie at the sail panel end and work forward from there.

DaveD · Post by **DaveD** » Sun Jan 13, 13 4:45 pm

Richard
Thanks for your reply.

Miles - do you have a link for this item?
Thanks
Dave

Derek · Post by **Derek** » Sun Jan 13, 13 4:51 pm

Part 1

Part 2

MilesnMiles · Post by **MilesnMiles** » Sun Jan 13, 13 7:47 pm

Here we go!

http://www.moparmusclemagazine.com/howt ... ewall.html

Hope this helps.