340 manifold bolts

Moderator: Moderators

Post Reply
Anonymous

340 manifold bolts

Post by Anonymous »

I have a passenger side 1968-70 340 manifold for my 360. two of the manifold to head bolts are quite specific in that they have a long shoulder (approx 2") before the threaded section. Can anyone supply me with a pair or know where i can source some?
Anonymous

Post by Anonymous »

did ya get these sorted dude ? i cant get to the shed for a week or two as i'm off on ol this coming week and busy as hell when i get back, but if ya can tell me the length overall i'll se what i got in the box, there's only about 8 cars worth of bolts so chances are..... !
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

If Hugh can't come up with any Year One sell them.
User avatar
Alex
Posts: 4817
Joined: Thu Apr 15, 04 10:20 pm
Location: 53 deg 45' N, 2 deg 32' W (Manchester)

Post by Alex »

Miles, I am sure they are tube NUTS that screw onto studs in the head mate, if you are not bothered about the length too much (they all do the job) I will have a look in my bits boxes, I am certain I have some.
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

I didn't click on the "bolt" bit. :oops: Yeah they often rust to the stud and the stud comes out of the block with them. :)
Anonymous

Post by Anonymous »

Hi chaps, Alex is right. They are a barrel nut that fit onto a stud. I was just about to order them from Mancini. However, if any of you guys have a pair that would be great. The part number of the manifold is 2863549 which puts the manifold as 1969-70 Barracuda/Dart.
Steve, not going for concourse but i got a pair of manifolds at areal good price and i dont want the hassle of headers. Also, imagine how much restriction the ancient 318 manifolds currently in place are, the port to gasket match is horrible too :shock: ?
The face to face length is (or depth of the hole) is 70mm or whatever that is in inches which is specific to this manifold from what i've read.
Anonymous

Post by Anonymous »

Steve, so did I! Barrel nuts and studs are the way forward apparrently(I cant spell at this time of the a.m :shock: )
User avatar
Alex
Posts: 4817
Joined: Thu Apr 15, 04 10:20 pm
Location: 53 deg 45' N, 2 deg 32' W (Manchester)

Post by Alex »

:hippy2:
Anonymous

Post by Anonymous »

Erm... :oops:

ps anyone found these items? If not i'll get onto mancini.
Post Reply