after help from any australian members

dave1977 · Post by **dave1977** » Wed Mar 25, 15 6:04 pm

hi this is non mopar but Australian a friend has got an au falcon ute with the 4 speed borg warner btr 93le auto box and basically it looks like the box is shot so was wondering if any Australian members may know of any for sale or how much shipping would be for either a box or a rebuild kit to uk many thanks in advance

Dave999 · Post by **Dave999** » Thu Mar 26, 15 8:35 am

i shipped a 4 speed manual box from a bloke in queensland last year
shipping was $350 and it was cheaper by air than sea. i still hve no idea how he managed that, given that it cost $150 to ship 2 brake calipers previoulsy

there are a few falcons over here......

Andyrob (on here) has a v8 supercar falcon which he totally rebuilt last year granted none of it is any use to your mate but it might be worth asking if he dismantled any similarly aged falcons and utes for body parts/spares.

Dave

Dave999 · Post by **Dave999** » Thu Mar 26, 15 8:40 am

PS Duncan "Cannonball" is an auto trans spcialist...worth asking. if its a BTR Transmission it can proably trace its technology back to the Borg warner 35/65

Motospecs sydney are the chaps who distribute BTR/BorgWarner/Spicer Axle spares to us meer mortals who want to buy 1 of each thing not 100,000

they will probanly have the gaskets bands bearings seals etc

easier to ship a rebuild kit than a whole box

Dave

dave1977 · Post by **dave1977** » Thu Mar 26, 15 10:12 pm

thankyou very much for the info and help ill tell my mate next time I see him

andyrob · Post by **andyrob** » Thu Mar 26, 15 11:10 pm

ive got a few falcon au's been chopped up but all auto\
do you fancy a conversion ??

Dave999 · Post by **Dave999** » Fri Mar 27, 15 10:58 am

yeah andy he is after an auto box....

no conversion needed...just a Box that i belive isn't widely used over here

Dave

dave1977 · Post by **dave1977** » Fri Mar 27, 15 7:06 pm

thankyou for that andy but ive spoke to him since it looks to be a solenoid gone which is not letting fluid through

Kev · Post by **Kev** » Fri Mar 27, 15 11:12 pm

So Andy has auto boxes, the ute needs an autobox, or parts.
Fixed?

dave1977 · Post by **dave1977** » Sat Mar 28, 15 5:09 pm

I looks to be one of the gear change solenoids hes going to look tomorrow if so hell buy new so it will last but thanks again for all your help

dave1977 · Post by **dave1977** » Thu Apr 02, 15 6:45 pm

hi thanks for the help and suggestions hes just messaged me its all up and running again

Mopar Muscle Association UK

after help from any australian members

after help from any australian members

help needed

help needed

ute box

all working