Mopar Muscle Association UK

Rewiring the indicators and brake lights on the Duster and it's been a while since I've done this and the brains not what it used to be. Can anyone tell me which connection on the switch goes to the brake lights and which is power in. Can't check with a voltmeter at the moment as inadvertently blown the fuse and ain't got anymore till I get to work tomorrow, want to get it all wired tonight if possible 😀

Skip, I think it's the pink wire. If you do a quick search under my name I did a complet 'how to convert' thread for the job your doing which includes running a new wire for the break light switch down to the rear of the car.
Can't find it now as I off to work,

Had a quick look and cant see reference to which wire

Scroll down the page for two big diagrams
Shows pink coming from Ignition to break pedal switch.

http://www.forabodiesonly.com/mopar/sho ... p?t=296091

My original detailed thread on how to convert to UK spec

http://www.moparuk.com/forums/viewtopic ... conversion

So other one is where I have to take feed from. If I remember rightly its the one thats a pain to get to and get a terminal back on.

Don't recall it being a problem Skip. Bit of a crawl under the dash though!

Sorry just read your other post

Depends if you have crap eyesight and big hands lol

Yep definately crap eyesight and big hands, 30 minutes to get one poxy terminal back on, job done now. Just reverse lights to rewire up and headlamps to convert.